 Oil Filter Removal Tool, How to remove the oil filter from a '73 914 2.0 |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 9ONE4_JIM |
 Feb 22 2021, 07:30 PM
Post
#1
|
|
Newbie  Group: Members Posts: 4 Joined: 18-February 21 From: Solvang, CA Member No.: 25,221 Region Association: Central California  |
Hi Members. Apologies for my very first post being a Porsche "Newbie" one, but I had a bear of a time yesterday trying to remove the oil filter on my just-acquired '73 914 2.0.
My trusty clamp style removal tool wouldn't expand wide enough to grab the old, in-place filter.The OD of original filter case is about 4" (101.6 mm) Side handle tools just would not fit in the limited space as well. After a good hour I did manage to finally get it out! I did the oil sump/strainer clean-up and regasketing as well – which also required some patience and coaxing. So my question is, is there a recommended wrench, socket or clamp tool for the oil filter removal? Thanks in-advance for your help. Jim |
   |
 
|
Posts in this topic
9ONE4_JIM Oil Filter Removal Tool Feb 22 2021, 07:30 PM
ndfrigi no special tool and does not need to tight. Espec... Feb 22 2021, 07:34 PM ClayPerrine I just use a pair of humongous channel locks.
:e... Feb 22 2021, 07:52 PM
JeffBowlsby
I just use a pair of humongous channel locks.
:... Feb 22 2021, 10:22 PM Mark Henry
I just use a pair of humongous channel locks.
... Feb 23 2021, 06:42 AM 914 RZ-1
Hi Members. Apologies for my very first post bein... Feb 22 2021, 09:26 PM 914_7T3 I thought it was hand tighten and remove as same.
... Feb 22 2021, 10:17 PM JamesM
I thought it was hand tighten and remove as same.... Feb 24 2021, 02:40 PM iankarr I like these...one tool, many cars...
https://www... Feb 22 2021, 10:32 PM jd74914
I like these...one tool, many cars...
https://ww... Feb 24 2021, 12:19 PM roblav1 You can always hammer a screwdriver right through ... Feb 23 2021, 12:23 PM Mark Henry
You can always hammer a screwdriver right through... Feb 24 2021, 10:56 AM 9ONE4_JIM Thanks for all the suggestions and specific ideas ... Feb 24 2021, 12:14 PM ClayPerrine
And thanks for the idea of a simply using a humo... Feb 24 2021, 02:07 PM 914forme I have used this one since the 80s, works on 99% o... Feb 24 2021, 02:04 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 28th October 2025 - 12:36 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.