 123... and your oils on the driveway, not the crankcase., If something can go wrong... |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| emerygt350 |
 Nov 6 2021, 02:09 PM
Post
#1
|
|
Advanced Member  Group: Members Posts: 2,143 Joined: 20-July 21 From: Upstate, NY Member No.: 25,740 Region Association: North East States  |
So.... Bought a 123injection distributor from tangerineracing and installed it nice and easy. Started it up to set the timing and I hear this weird slurping noise.
That nearly irreplaceable hose that goes from the block to the remote oil pressure sender had finally given out. Chris is trying to find the appropriate fittings to replace it. Also, chasing a vacuum leak around the intake on cylinder 4. Just replaced the spacer a month ago and really was careful with the blue gas safe sealer etc. The injector seals are all new. Spraying very carefully it really does appear to be the area near the spacer. Any tips and tricks? Nobody would ever suspect a 914 is behind that door...  |
   |
 
|
Posts in this topic
emerygt350 123... and your oils on the driveway, not the crankcase. Nov 6 2021, 02:09 PM
mlindner Yup, air cooled VW/Porsche owner lives there. All ... Nov 7 2021, 06:44 AM
914e
Yup, air cooled VW/Porsche owner lives there. All... Nov 7 2021, 08:29 AM Aerostatwv
Yup, air cooled VW/Porsche owner lives there. Al... Nov 7 2021, 12:51 PM 76-914 Look carefully at the injector to see if it is sli... Nov 7 2021, 08:05 AM emerygt350
Look carefully at the injector to see if it is sl... Nov 7 2021, 10:51 AM Van B Emery,
Can you add some photos as you work throug... Nov 7 2021, 12:06 PM emerygt350 Pulled the injector and added a little grease to t... Nov 7 2021, 02:26 PM iankarr The OEM sender is screwed directly into the block.... Nov 7 2021, 03:35 PM emerygt350
The OEM sender is screwed directly into the block... Nov 7 2021, 04:18 PM ChrisFoley
The OEM sender is screwed directly into the bloc... Nov 8 2021, 05:22 AM emerygt350
[quote name='emerygt350' post='2958321' date='Nov... Nov 8 2021, 07:37 AM ChrisFoley I just found two different tapered metric male to ... Nov 8 2021, 06:15 AM BeatNavy I was pretty sure the dual VDO sending units don... Nov 8 2021, 06:53 AM ChrisFoley stainless adapter
brass adapter Nov 8 2021, 09:55 AM emerygt350 Thanks, I was looking at that stainless one. That... Nov 8 2021, 10:23 AM ChrisFoley I think the tin clears the head, even though the e... Nov 8 2021, 03:02 PM emerygt350
I think the tin clears the head, even though the ... Nov 8 2021, 07:47 PM ChrisFoley
Chris, any luck on the fitting? I assume I shou... Nov 9 2021, 10:00 AM emerygt350 Ok, I ordered that brass one. I will just try to ... Nov 9 2021, 10:30 AM ChrisFoley I would see if I can do all the necessary tuning w... Nov 9 2021, 10:44 AM emerygt350
I would see if I can do all the necessary tuning ... Nov 9 2021, 10:48 AM emerygt350 The brass adapter doesn't thread into the bloc... Nov 13 2021, 09:10 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 7th June 2024 - 04:43 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.