Can't figure out white wire, not getting fuel to rails |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Can't figure out white wire, not getting fuel to rails |
jackspratt |
Mar 6 2022, 04:36 PM
Post
#1
|
Member Group: Members Posts: 55 Joined: 5-February 22 From: Canada Member No.: 26,315 Region Association: Pacific Northwest |
I have fuel pumping but not getting to the rail on the drivers side. And looking at the hose coming from the passenger battery area side I see there is a connection junction half way point over to the drivers side rail. Is this the cold start valve? Because I have this white wire not connected and another plug with a boot on it not plugged in also. Any idea where the white wire connects to?
And the other question is. ...... if those 2 things are not connected. Would that prevent fuel from moving to the drivers side rail. And the injectors not firing? And if there is fuel on the passenger side rail and not the drivers side rail, would that all prevent ALL injectors not to fire? Very much a novice here..... and thanks in advance for any info or a diagram of where that white wire plugs in to. Right now I have it cranking, fuel pump pumping.... but not firing up. I have checked for spark at the plugs and have that. Attached image(s) |
Lo-Fi Version | Time is now: 1st June 2024 - 08:08 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |