 Depinning Bosch fuel injection connectors |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| steuspeed |
 Mar 27 2022, 12:08 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,008 Joined: 12-July 11 From: Portland, Oregon Member No.: 13,308 Region Association: Pacific Northwest  |
I'm replacing all the rubber boots on my FI connectors. I made these tools out of windshield wiper blade metal strips. I got about half the pins out by depressing the stop tab in the slot above the pin. The rest are not budging. I read on a Rennlist board that the the other side of the female pin could be digging in the plastic. I'll try and see if I can verify if the pin slot is smooth all the way through.
Edit: It is smooth all the way through. The plug side is not catching. Any tips? Anyone know where to source replacement connectors? Attached thumbnail(s)  
|
   |
 
|
Posts in this topic
steuspeed Depinning Bosch fuel injection connectors Mar 27 2022, 12:08 AM
Geezer914 I purchased the boots, pins and connectors on eBay... Mar 27 2022, 05:46 AM 914Mels Rock auto has the connectors fairly cheap. I forge... Mar 27 2022, 01:47 PM
steuspeed
Rock auto has the connectors fairly cheap. I forg... Mar 28 2022, 02:09 PM 914Mels Look kind of thick to push in, I'd grind em do... Mar 28 2022, 06:11 PM steuspeed
Look kind of thick to push in, I'd grind em d... Mar 31 2022, 02:42 AM steuspeed So 3 out of 8 pins I could not get out with my hom... Mar 31 2022, 02:15 AM steuspeed duplicate Mar 31 2022, 02:45 AM steuspeed You can see the top connector is bent 180 degrees ... Mar 31 2022, 02:25 AM 914Mels
You can see the top connector is bent 180 degrees... Mar 31 2022, 12:38 PM JeffBowlsby The tang bears on the end wall (ledge) of the cavi... Mar 31 2022, 08:57 AM JeffBowlsby More likely it was just removed by pulling it out ... Mar 31 2022, 01:17 PM steuspeed
More likely it was just removed by pulling it out... Mar 31 2022, 02:38 PM JeffBowlsby
Is there a polarity on the injector wires? I... Mar 31 2022, 05:21 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 16th June 2024 - 08:09 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.