Removing CV Joint from Stub axle, Trying to do it on the car |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Removing CV Joint from Stub axle, Trying to do it on the car |
eyecolor |
Oct 30 2022, 03:59 PM
Post
#1
|
Eyecolor Group: Members Posts: 80 Joined: 15-August 08 From: Wilmington,DE Member No.: 9,425 Region Association: None |
I have disconnected the CV joint from the transmission and have the bare minimum left to remove from the splined end.. I have removed the C clip!!
Any trick to getting it to budge? The angle makes it difficult to pull with any real force. I am afraid any type of 3 jaw puller will bend something it should not. I did let it soak with lubricant . I could get away with re-inserting the ball bearings but have found that after 3 of them gravity takes over. Open to any suggestions. Thanks George \Wilmington DE |
Lo-Fi Version | Time is now: 28th May 2024 - 12:56 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |