Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Shift rod boot extension- Tangerine bushing.
peteinjp
post Nov 13 2022, 06:20 AM
Post #1


Member
**

Group: Members
Posts: 201
Joined: 15-July 21
From: Japan
Member No.: 25,723
Region Association: None



My car has the tangerine bushing installed and while it does have a groove for the rubber boot in my case (may be related to the shift rod??) the boot just would not stay on when going into R,2, or 4. I measured the O.D. and found it conveniently to be 2.25" and ordered this 2.25 to 2.5"I.D. exhaust adapter:

(IMG:http://www.914world.com/bbs2/uploads_offsite/m.media-amazon.com-25723-1668342024.1.jpg)

A little chopping, belt sanding and then some hammer work on a simple buck yielded this:

Attached Image

Installed (slip fit but may do use some sealant to keep water out:)

Attached Image

In action:

Attached Image

Attached Image

Just thowing this out there in case others have the same problem- which I admit is unlikely but anyway....

Best!

Pete
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 28th May 2024 - 12:13 PM