 Front Brakes, Bending the hardline to the caliper |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Deusexmachina77 |
 Mar 3 2023, 03:57 PM
Post
#1
|
|
Member  Group: Members Posts: 93 Joined: 30-March 22 From: Chicago Member No.: 26,426 Region Association: Upper MidWest 
 |
I'm trying to wrap up my front-end refresh and install my brake calipers.
1. Did I install the brake pad properly? Am I missing parts to hold the pins in place, or am I good? 2. Any tips on bending the gas line to the caliper? I'm worried I'm going to put a kink in it. Thanks, Victor   |
   |
 
|
Posts in this topic
Deusexmachina77 Front Brakes Mar 3 2023, 03:57 PM
mepstein The brake line used a banjo bolt Mar 3 2023, 04:05 PM
Deusexmachina77
The brake line used a banjo bolt
I removed a str... Mar 3 2023, 05:19 PM mepstein The connection from the hardline to the caliper is... Mar 3 2023, 06:42 PM davep Many front calipers use the Banjo connection for a... Mar 3 2023, 06:58 PM Deusexmachina77
Many front calipers use the Banjo connection for ... Mar 3 2023, 07:13 PM r_towle
Many front calipers use the Banjo connection for... Mar 3 2023, 08:14 PM Deusexmachina77 I guess I didn't think to look for something e... Mar 3 2023, 07:09 PM mgphoto The items you need are listed in the PET
Num... Mar 3 2023, 07:11 PM Deusexmachina77
The items you need are listed in the PET
Nu... Mar 3 2023, 07:27 PM 914 RZ-1 I'm having a similar issue: I want the brake l... Mar 5 2023, 12:41 PM willieg I had a similar problem with two calipers I purcha... Mar 5 2023, 06:35 PM 914 RZ-1
I had a similar problem with two calipers I purch... Mar 5 2023, 09:23 PM Mike D. 914 RZ-1 is Right.
The later front caliper, 73 on... Mar 6 2023, 12:45 AM Eric_Shea As per Mike's post, you have a late caliper an... Mar 6 2023, 09:03 AM 914 RZ-1 Thanks, Mike D. and @Eric_Shea .
I called PMB an... Mar 6 2023, 08:54 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 4th June 2024 - 01:13 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.