 Rocker shims!, out of stock? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| emerygt350 |
 Aug 12 2023, 02:36 PM
Post
#1
|
|
Advanced Member  Group: Members Posts: 2,141 Joined: 20-July 21 From: Upstate, NY Member No.: 25,740 Region Association: North East States  |
Well, just got the rockers back on and I have almost no play left in the intake. exhaust has plenty but most of the intakes have less than .06 when backed all the way out. The geometry looks good but I can't run it like that. I need to shim it. I double and triple checked that my pushrods were inserted correctly. I would hate to have to cut new pushrods.
I see pmb has some shims in stock. How big do I need to go to add some distance? Is it weird that the exhausts have all that space and the intakes are hugging the stems? I didn't shave the head or the block. I did remove the .03ish thick head gasket and the .01 shim that was under the old sleave. I added back in a .02 shim, no head gasket. So I really shouldn't be looking at more than a .02 drop in height. |
   |
 
|
Posts in this topic
emerygt350 Rocker shims! Aug 12 2023, 02:36 PM
brant Did you put a dial indicator on it
Your geometry c... Aug 12 2023, 02:54 PM r_towle Custom length rockers is the way.
There are kits o... Aug 12 2023, 03:26 PM emerygt350
I mean it isn't perfect but it isn't fa... Aug 12 2023, 03:38 PM
bkrantz The angle looks good in that photo. A shorter pus... Aug 12 2023, 07:35 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 7th June 2024 - 03:13 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.