 Removing an Axle with a broken CV, How do you keep it from turning |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Jaiden |
 Aug 30 2005, 09:21 AM
Post
#1
|
|
Member  Group: Members Posts: 346 Joined: 13-January 05 From: Stroudsburg PA Member No.: 3,443  |
So I'm about to start the tear down of the rear end to swap out the axle that has a blown CV joint.
But the issue I will have is how do I keep the axle from turning while I try to loosen the Axle bolt's out of the Transmission? Any Tips? I really want to make it to the ECC so I have to get this swap done as quickly as possible. Thanks in Advance. |
   |
 
|
Posts in this topic
Jaiden Removing an Axle with a broken CV Aug 30 2005, 09:21 AM
nein14-6 Yeah man, put it in gear and have someone hold the... Aug 30 2005, 09:32 AM James Adams ... Aug 30 2005, 09:38 AM Jaiden So how tight are these bolts anyway? Will someone... Aug 30 2005, 09:39 AM Jaiden Can you put an air gun on the bolts to get them of... Aug 30 2005, 01:20 PM Porsche Rescue Torque spec is only 31 lbs. Make sure you clean al... Aug 30 2005, 01:33 PM Travis Neff The CV bolts shoud be torqued down to 31ft lbs. I... Aug 30 2005, 01:33 PM sgomes http://www.914world.com/bbs2/h... Aug 30 2005, 01:39 PM James Adams Aug 30 2005, 07:00 PM Demick BTW. I use an air ratchet to remove the CV bolts.... Aug 30 2005, 07:21 PM sgomes You guys are thinking too much about this problem.... Aug 30 2005, 09:01 PM
Jaiden Well thanks for all the advice.
I'm still wait... Aug 31 2005, 06:29 AM  |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 7th June 2024 - 05:02 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.