 2.7 - 6 scavenge oil line fitting |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Eddie914 |
 Sep 21 2005, 05:33 PM
Post
#1
|
|
Unregistered  |
The 2.7 in the teener needs a new scavenge pump oil line fitting. The original fitting screws into the case and has a male 30mm fitting. When the car was converted to a 2.7 six, an AN12 male fitting was welded to the original 30mm fitting. This made the fitting a bit long and I'm having difficulty getting adequate clearance for the oil line going from the engine scavenge pump to the oil tank. I've tried straight fittings and 45 degree fittings and the oil line comes too close to the headers. A 90 degree fitting can be installed but only prior to installing the header.
I'm looking to find a fitting that screws into the case and has an AN12 male fitting. What are good sources. What size is the scavenge pump output? Thanks Eddie |
 
|
|
Posts in this topic
Eddie914 2.7 - 6 scavenge oil line fitting Sep 21 2005, 05:33 PM
ArtechnikA Elephant will have or can get what you need. or B... Sep 21 2005, 05:36 PM TimT Rich Clewett makes an adapter, or BAT sells a flu... Sep 21 2005, 05:44 PM sixnotfour Modify the hard line that comes with the 2.7 . Af... Sep 21 2005, 07:01 PM J P Stein Turn the 90 to the rear, run it back past the end ... Sep 21 2005, 08:21 PM J P Stein Continued...lots of room for everything. Makes one... Sep 21 2005, 08:22 PM
Porsche Rescue Here is what Jeff (sixnotfour) is talking about. H... Sep 21 2005, 08:36 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 01:45 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.