 Replacing the stock trunk rollers w/metal ones., Rear trunk lid stays attached. |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Air_Cooled_Nut |
 Oct 7 2005, 11:10 PM
Post
#1
|
|
914 Ronin - 914 owner who lost his 914club.com  Group: Members Posts: 1,748 Joined: 19-April 03 From: Beaverton, Oregon Member No.: 584 Region Association: None  |
Okay, after doing this procedure I see that the thread that started it is now locked so here's a slightly different version.
Here's the longer version: http://www.icbm.org/erkson/personal/porsch...replacement.htm Here's the short version: Open trunk lid and make sure it stays fully opened: Attached thumbnail(s) 
|
   |
 
|
Posts in this topic
Air_Cooled_Nut Replacing the stock trunk rollers w/metal ones. Oct 7 2005, 11:10 PM
Air_Cooled_Nut 10mm deep socket with 6" extension will be your to... Oct 7 2005, 11:11 PM Air_Cooled_Nut How it looks when done: Oct 7 2005, 11:12 PM Air_Cooled_Nut Not too helpful? Well, that's why I made a VI... Oct 7 2005, 11:13 PM Carl Thanks for the lesson, Toby. Do you have details ... Oct 8 2005, 12:10 AM Air_Cooled_Nut Here's where you get them:
http://www.pelicanp... Oct 8 2005, 12:33 AM gregrobbins Thanks Toby.
Carl, check on eBay. Desert Hybrids ... Oct 8 2005, 12:35 AM Brando As for those tortion bars... how do you get the fu... Oct 8 2005, 12:39 AM Air_Cooled_Nut http://www.914world.com/bbs2/index.php?act=...=ST... Oct 8 2005, 07:39 AM Carl Thanks for the roller info. One side failed on my... Oct 8 2005, 09:15 AM Pugbug I also need a set of these rollers. The ones from ... Oct 8 2005, 09:42 AM Mueller Oct 8 2005, 11:41 AM Air_Cooled_Nut ...and aluminum can come in different hardnesses.
... Oct 8 2005, 02:36 PM gregrobbins I am pretty sure the golden ones are brass. Oct 8 2005, 03:06 PM RustyWa The ones I got from Pelican last December were alu... Oct 8 2005, 04:55 PM
Brando I gots a pair of aluminum ones I gotta install. Oct 8 2005, 09:05 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 4th June 2024 - 10:53 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.