 Front oil cooler possibility, for my GT style oil system |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| michel richard |
 Dec 23 2005, 07:53 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,291 Joined: 22-July 03 From: Longueuil, Québec Member No.: 936  |
So, in the process of building my GT style 914/6 I'm working on the oil system. I'm not too fussy and if a part is not apparent, event with the hoods open, I don't care too much if it looks original or not.
The original 914/6 GT cars used a front oil cooler that was a very close relative to the 906 oil cooler. If a 906 cooler is rare and expensive, an actual 914/6 GT cooler must be in the "mortgage your house and promise your next born" category. And I don't mind saving a fe bucks if I can. So I've come across this idea for the front cooler. I bought a 928 automatic transmission oil cooler. The cooling portion (between the end tanks) is 23 inches wide, by 2.75 inches high. The cooler is 1.25 inches thick. Here are a few pictures. Attached image(s) 
|
   |
 
|
Posts in this topic
michel richard Front oil cooler possibility Dec 23 2005, 07:53 PM
michel richard The part number: Dec 23 2005, 07:54 PM davep Looks okay, and it is a Porsche part. Dec 23 2005, 07:55 PM michel richard And the end tank where the ol lines connect. The ... Dec 23 2005, 07:56 PM Aaron Cox what are the inlet sizes? 3/8?
a six needs minimu... Dec 23 2005, 07:57 PM michel richard Here's a bunch of pictures of the real part. ... Dec 23 2005, 08:07 PM TimT Bad idea, you need to get at least -12 or equal in... Dec 23 2005, 10:37 PM Quilmes I think that it depends on the size of the engine ... Dec 23 2005, 11:21 PM michel richard Quilmes,
Do you have more info on how the 944 int... Dec 23 2005, 11:26 PM trekkor I'll spare you the pics. http:/... Dec 23 2005, 11:29 PM Van914 You could also use a RX-7 Cooler as we have done o... Dec 24 2005, 05:18 AM joea9146 Hi Michel
I would go with a Fluidyne cooler , I ... Dec 24 2005, 06:09 AM Mark Henry It's a tough call on the price... say $40... Dec 24 2005, 07:11 AM michel richard ... Dec 24 2005, 07:37 AM d914 check out some of the race part houses, in general... Dec 24 2005, 07:43 AM michel richard I think about it a little more, and my original id... Dec 24 2005, 07:49 AM Bleyseng Don't get the early RX7 cooler as its steel, t... Dec 24 2005, 09:37 AM Mark Henry I was "told" mine is an early one...but it's a... Dec 24 2005, 09:54 AM
carr914 Michel, I would go with the Fluidyne. You don... Dec 24 2005, 10:19 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 13th June 2024 - 08:01 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.