 distributor vacume can sucks |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| chas |
 Dec 27 2005, 03:15 PM
Post
#1
|
|
Newbie  Group: Members Posts: 24 Joined: 30-November 05 From: seattle,wa Member No.: 5,214  |
(IMG:http://www.914world.com/bbs2/html/emoticons/unsure.gif) This distributor vacume can is off a 73 1.7, # 0 231 174 007.When I put a vacume on it the arm moves but the can won't hold it,should it? I'm still trying to fix my driveability problem.This motor is just rebuilt and has new injectors for the stock D jet..The FI worked good before tear down,it throttles up good with no load but under load it just boggs, sometimes backfires,if I pump the gas pedal [ throttle position switch ,accelerater pump]I does a little better.The signal points in the dis are good .I do have a newly installed pertronix ,should I put the points back in.Its getting fuel and I am going to check the pressure as soon as I get it put back together and running.The coil is old so I am going to put a new blue in it with new HT wires and plugs as the old wires seemed to be to short [did they shrink?]
|
   |
 
|
Posts in this topic
chas distributor vacume can sucks Dec 27 2005, 03:15 PM
Dr. Roger the vacuum diaphram should hold vacuum.
if it doe... Dec 27 2005, 03:18 PM
chas Does anyone have a distributor vacuue can or compl... Dec 27 2005, 03:43 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 15th June 2024 - 09:21 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.