 Plenum removal, Noob question |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Rand |
 Feb 13 2006, 08:11 PM
Post
#1
|
|
Cross Member  Group: Members Posts: 7,409 Joined: 8-February 05 From: OR Member No.: 3,573 Region Association: None  |
How is the plenum fastened down on a '75 2.0? (IMG:http://www.914world.com/bbs2/html/emoticons/051103-stupid4.gif) Once the intake runners are off, what else needs to come loose to get the plenum off?
There are a couple of holes in the plenum next to the throttle body with tubes running through the plenum, but I couldn't find a screw head in the bottom of those. There's a tab on the drivers side with a screw in it, but that didn't let it loose. I had just started taking it apart when I got a call and had to drive... So I put everything back with a new gasket between throttle body and plenum, and found a couple of small cracks near the tubes that run through the plenum. Sealed those with tape for now. It did drop my idle and there's a little bit of a whistle now. My fast idle problem is just about narrowed down to a cracked plenum. Before I dig in again I'd like to know exactly how it's fastened. |
   |
 
|
Posts in this topic
Rand Plenum removal Feb 13 2006, 08:11 PM
rhodyguy there's one bracket on the rear too Feb 13 2006, 08:21 PM Dave_Darling I believe that there are two "feet" on the sides/f... Feb 14 2006, 01:07 AM
Rand Thanks Kevin and Dave!
I had missed the bolt ... Feb 14 2006, 01:17 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th June 2024 - 06:43 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.