 Check for hidden rust, looks can be deceiving! |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| rjames |
 Apr 17 2006, 10:33 AM
Post
#1
|
|
I'm made of metal  Group: Members Posts: 3,956 Joined: 24-July 05 From: Shoreline, WA Member No.: 4,467 Region Association: Pacific Northwest 
 |
In doing some minor rust repairs on my driver's side long, I decided to do a little exploritory surgery. I cut a small part of the outer layer of sheet metal out on the the inner wheelhouse (at least this is what Restoration Design calls it, I think) and found some mild surface rust. It looks a LOT worse in the photo then it actually is as what is shown in the picture really is all just surface rust. (sorry for the bad photo- camera phone) I'll be welding
on a replacement 'outer layer' of metal just as soon as I can fabricate the piece. There was NO sign of this on the outside of the wheelhouse- I only cut into it because I had seen some rust in between layers of sheet metal further down towards the front end of the car on the long on that same side. It might not be a bad idea for others to cut a small square of the first layer of sheet metal out on their cars in the same spot just to make sure all is what it appears. A dremel tool makes it real easy to just take the outer later off- it allows you to cut really slowly and NOT go into the 2nd layer of sheet metal. Rust is fun! (IMG:style_emoticons/default/ar15.gif) Attached image(s) 
|
   |
 
|
Posts in this topic
rjames Check for hidden rust Apr 17 2006, 10:33 AM
Eric_Shea Why not drill a small hole and use a garder spraye... Apr 17 2006, 11:13 AM
rjames The metal is sandwhiched together pretty snuggly, ... Apr 17 2006, 12:30 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 10th June 2024 - 06:08 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.