CV saftey wire bolts by RJMII!, Never worry about your CV coming off agian! Options

[Dr Evil]

UPDATED MAY 3, 2010!!!!

If you have worked on your 914 (who hasn't) then you know what a royal PITA it can be to keep your CV bolts tight. Many times people have had them come out and cause damage. I urge everyone to check their CV bolts often as many end up being loose after a very short time.


Orrrr, you can saftey wire them and sleep better at night knowing that your CVs aint going no where.

The details:
Bolts are 12.9 hardness (harder than stock) 6mm socket head(no special tripple square tool needed).
They are drilled out and chamfered.
They come with a full set of new schnorr washers (serrated washers that are cupped and should ALWAYS BE USED no matter what).


Have a different size bolt that you want converted? Shoot RJMII a PM here on the forum and he will see what he can do. Same thing goes for different quantities of things.

Ordering info --> http://www.vintagetransrebuilds.com/transr...fety-bolts.aspx


(Note: I used to do these and Jim took over and is doing an even better job. I just converted my original ad so as to reflect the change. Sorry for any confusion. Please contact Jim [RJMII] for your transmission and CV bolt needs)