 What size CV's do I have? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| GWN7 |
 Jun 28 2006, 09:31 PM
Post
#1
|
|
King of Road Trips  Group: Members Posts: 6,280 Joined: 31-December 02 From: Winnipeg, MB, Canada Member No.: 56 Region Association: Northstar Region  |
So it runs. Drove it tonight. (IMG:style_emoticons/default/biggrin.gif) I looked like this afterwards (IMG:style_emoticons/default/w00t.gif)
But while finishing it up I found I was short one CV plate (plate is what Porsche calls them). Guess the guys that dropped the Schnorr washers also dropped the plate. NP I thought, I'll just use one off the parts car. I slide it on and start to hand tighten the bolts and it binds. WTF!! I pull it off and one of the original ones that I had just put on and compare. The stock CV plate is on top of the one from the car in picture 1 and the two side by side in picture 2 So what size/type CV's do I have? I'm guessing the output flanges are different than stock also, for the CV to bolt up to it? The bolts are a couple mm longer than stock also. I tryed to use ones off the parts car and they wouldn't tighten down. Attached image(s)  
|
   |
 
|
Posts in this topic
GWN7 What size CV's do I have? Jun 28 2006, 09:31 PM
Joseph Mills [quote name='GWN7' date='Jun 28 2006, ... Jun 28 2006, 09:48 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 11th June 2024 - 01:50 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.