 front suspension woes, what's bend? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| SirAndy |
  Oct 15 2003, 12:39 PM
Post
#1
|
|
Resident German  Group: Admin Posts: 41,676 Joined: 21-January 03 From: Oakland, Kalifornia Member No.: 179 Region Association: Northern California  |
sooo, i'm getting ready for a alignment of the car and i'm having a problem with my front suspension.
i knew the car was hit in the front. i knew the 911 front suspension came out of a car that was hit in the front. now, the front suspension mount on the pass. side (A-Arm) does not line up correctly. the mount is supposed to be a tight fit with the bushing and the a-arm "stop". but it's about 1/4 to 1/2 inch off. altough it is tight, no play. something is obviously bent. how can i find out if either my tub is bend or if the pass a-arm (or worse, the cross member) is bend? anyone has some measurements? i do have a stress-crack in the chassis right next to that mount. but i'm not sure if that was from the crash or additional stress of a bend suspension or what. help! Andy |
   |
 
|
Posts in this topic
SirAndy front suspension woes Oct 15 2003, 12:39 PM
davep There are measurements in a few places I think. I ... Oct 15 2003, 01:21 PM
Dave_Darling The measurements are in the shop manuals. You can... Oct 15 2003, 05:04 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 8th June 2024 - 07:17 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.