 mounting pressure plate, question about fitment... |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| type47 |
 Aug 10 2006, 06:36 PM
Post
#1
|
|
Viermeister  Group: Members Posts: 4,254 Joined: 7-August 03 From: Vienna, VA Member No.: 994 Region Association: MidAtlantic Region  |
it's been a long time since i installed a pressure plate and want to know if what i have is right. i'm mounting the pressure plate and clutch disk. i mount the disk with a little splined tool but when i fit/locate the pressure plate, the edges of the plate where the bolts go thru do not touch the flywheel surface. it would be like the bolts would draw or pull the pressure plate toward the flywheel as the bolts are tightened. the edge of the PP where the bolts go thru is about 1/2 inch off the flywheel bolting surface. is this what provides the clamping force on the disk? sorry for the noob question but don't want to have to redo a problem i overlooked. many TIA
|
   |
 
|
Posts in this topic
type47 mounting pressure plate Aug 10 2006, 06:36 PM
mihai914 It's not the best of pictures but I hope it he... Aug 10 2006, 06:48 PM TonyAKAVW I just installed a pressure plate the other day an... Aug 10 2006, 06:54 PM Cap'n Krusty Tighten the bolts a turn at a time, either in an a... Aug 10 2006, 07:02 PM
type47 got the pins, just haven't done this in such a... Aug 10 2006, 07:11 PM  |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 29th May 2024 - 01:43 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.