Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> All Targas Flex or do they!
All Targas Flex or do they!!
How much does your car flex when jacked at the rear donut. Measure the gap change at the windshield with the wheels on the ground and off the ground.
None it's tight as new [ 14 ] ** [31.11%]
0 to 1/16 " [ 19 ] ** [42.22%]
1/16" to 1/8" [ 7 ] ** [15.56%]
More than 1/8" [ 5 ] ** [11.11%]
Total Votes: 45
Guests cannot vote 
tracks914
post Aug 13 2006, 11:25 AM
Post #1


Canadian Member
****

Group: Benefactors
Posts: 2,083
Joined: 15-January 03
From: Timmins, Ontario, Canada
Member No.: 153
Region Association: None



When I bought another 914 2 months ago I new it had a broken back. When I picked it up in the middle I saw that it flexed about 3/8" from the windshield to the rear hoop and I knew it was in for some major work.
Today I jacked my "good car" to adjust the clutch and just for fun decided to see if the car "flexed" at all. To my surprise, my "tight" recently restored car had about a 1/16" difference between the windshield and the rear hoop with the wheels off the ground and on.
Just how good is good and how bad is bad?
Just how bad is yours?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic
tracks914   All Targas Flex or do they!   Aug 13 2006, 11:25 AM
JPB   Good question and can't wait to hear some answ...   Aug 13 2006, 02:19 PM
SirAndy   they all flex a little. 1/16 sounds about right, n...   Aug 13 2006, 02:58 PM
tracks914   Come on guys, go jack up your car and see how much...   Aug 13 2006, 04:58 PM
trekkor   My car's still on the trailer, but I will try ...   Aug 13 2006, 05:24 PM
retrotech   I have a lift that sets at fronrt edge of floor, a...   Aug 13 2006, 06:07 PM
PORobinSCHE   i have lifted my car several times using either th...   Aug 13 2006, 06:34 PM
tracks914   On my new project car with 3/8" (or more) of ...   Aug 13 2006, 07:00 PM
bondo   Here's what I get... I hope it's precise e...   Aug 13 2006, 07:26 PM
tracks914  

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 

- Lo-Fi Version Time is now: 23rd May 2024 - 06:25 AM