 Help with my sandwich plate install!, Pre RRC disaster |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| AZ914 |
 Sep 9 2006, 02:27 PM
Post
#1
|
|
914 Dumbass  Group: Members Posts: 1,459 Joined: 6-January 03 From: Sunny Tucson Member No.: 98 Region Association: Southwest Region  |
Hey all,
Trying to get my oil cooler installed before the RRC otherwise I'm not going. So I have a MOCAL thermostatic sandwich plate. I can mount this without problem. However, there is NO way that I can attach both oil lines to it at the same time because of clearance issues or angle issues. I can get one on, but then can't get the angle to get the other on, etc. I have the 75 heating system so its a little different than some of the other installs (Demick's etc.) There is not enough room to put 180's etc either. What I would like to do is find a 3/4" - 1" spacer that would go between my sandwich plate and the stock filter location. This would lower the sandwich adapter enough that I could get clearance to attach both oil lines. Does such a thing exist? I've seen bypass units, etc. but not a simple spacer. HELP! |
   |
 
|
Posts in this topic
AZ914 Help with my sandwich plate install! Sep 9 2006, 02:27 PM
draperjojo Your local machine shop could probably do it. The ... Sep 9 2006, 02:42 PM JPB Extend one of the fittings with a threaded nipple ... Sep 9 2006, 07:30 PM Aaron Cox Hey jason, i have some pics of my install in my bl... Sep 9 2006, 07:33 PM AZ914 Thanks for the posts.. I cannot really extend m... Sep 9 2006, 08:48 PM Krieger914 I'm not sure if I entirely folow all your deta... Sep 9 2006, 09:58 PM Aaron Cox take off that heater pipe for now.... get r done.
... Sep 9 2006, 10:12 PM AZ914 Ok, well I'm giving up on the sandwich plate i... Sep 11 2006, 11:19 PM mikez BTW...ANOTHER reason why you shouldn't use FRA... Sep 11 2006, 11:35 PM
AZ914 Z.. Yeah, I saw in that tech aritcle that he was r... Sep 12 2006, 09:35 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 28th May 2024 - 12:39 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.