 V8 conv engine question., Sat for a long time, should I start? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| LowGT |
 Mar 19 2007, 10:48 PM
Post
#1
|
|
1.8 and Proud!  Group: Members Posts: 583 Joined: 2-October 05 From: Wylie, TX Member No.: 4,904 Region Association: Southwest Region  |
I bought a V8 conversion project back around Christmas. It's pretty much done and saw some minimal road time, then it sat for 6 years or so.
I put some oil in the spark plug holes several times in the last few months. I just tried to turn the motor but the starter wouldn't do it. I couldn't get a socket or anything on the crank pulley because its very close to the firewall, so I locked one wheel and turned the other. With some moderate coaxing in the beginning, it turns pretty good now. The starter turns it weakly with the plugs out, but it is a stock 914 unit. Its a Rod Simpson conversion that I plan on updating with a few Renegade parts. I want to put the mount bar and trans mounts to move the motor back, as well as the Renegade cooling system. I'd like to hear to engine sputter before I do all that, but do you think the motor is okay since it was slightly stuck? Dan |
   |
 
|
Posts in this topic
LowGT V8 conv engine question. Mar 19 2007, 10:48 PM
Crazyhippy Try it, worst case you have to re-build... you wou... Mar 19 2007, 10:53 PM LarryR
I bought a V8 conversion project back around Chri... Mar 19 2007, 10:58 PM rick 918-S Toss the junk starter and replace it with a 911 un... Mar 19 2007, 11:06 PM LowGT Yea, I just tried to start it and the starter does... Mar 20 2007, 07:53 PM wbergtho I've got the Ebay Hi torque mini starter on my... Mar 20 2007, 08:57 PM rick 918-S Hi-torque works good. I have a 911 starter crankin... Mar 20 2007, 11:09 PM
messix if you can pull the dizz and get a oil pump drive ... Mar 20 2007, 11:27 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 05:15 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.