 Wheel spacers., For 6 front |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| burton73 |
 Jul 13 2007, 10:04 PM
Post
#1
|
|
burton73  Group: Members Posts: 3,538 Joined: 2-January 07 From: Los Angeles Member No.: 7,414 Region Association: Southern California 
 |
I have long studs on my 914-6 front end because the PO ran BBS wheels on my 6 so I should not need to put longer studs on. When fitting the flares up front with a pair of Fuchs 8s the spacing is just right. I cannot find a set of 8s so I will move wheels around and put the 9” from my Carrera on the 914-6 back and 8” on the Carrera. This leaves me with 7s for the front.
I end up with Factory 7s with spacers and 9s on the 914-6 7s and 8s on my Carrera. So What Porsche spacers to put up front to space out the 7” Fuchs. It would seem like 1” but that may not be right. And what type is the right one? Bob |
   |
 
|
Posts in this topic
burton73 Wheel spacers. Jul 13 2007, 10:04 PM
Eric_Shea 7mm, 27mm or 21mm spacers came on the front of 914... Jul 13 2007, 10:32 PM Johny Blackstain Bob- I used 21mm spacers on the front of my six. ... Jul 13 2007, 10:38 PM Eric_Shea Pretty sure that will be my choice as well. Any p... Jul 13 2007, 10:48 PM
Johny Blackstain
Pretty sure that will be my choice as well. Any ... Jul 13 2007, 11:05 PM burton73 My wheels are 16” Al, is the shot of you car on ... Jul 13 2007, 11:06 PM Johny Blackstain
My wheels are 16” Al, is the shot of you car on... Jul 13 2007, 11:12 PM Blood red 914-6gt A problem with putting spacers on the front is it ... Jul 13 2007, 11:07 PM Johny Blackstain
A problem with putting spacers on the front is it... Jul 13 2007, 11:24 PM burton73 Al,
Why do you need a 4 steering column? Did 916s... Jul 13 2007, 11:43 PM Johny Blackstain
Al,
Why do you need a 4 steering column? Did 916... Jul 13 2007, 11:53 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 31st May 2024 - 10:38 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.