 Who makes a metal clutch cable pulley? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| RS22b |
 Jul 23 2007, 08:50 AM
Post
#1
|
|
Type Broken!  Group: Members Posts: 223 Joined: 8-January 05 From: Vernon, NJ Member No.: 3,425  |
Had a slight issue over the weekend with my stock plastic piece.
i will need a metal pulley instead of the plastic one so i can actually drive my car again. This is the pulley on the passenger side of the trans case. It is actually right next to my header collector and it apparently got too hot. I stepped on the clutch and it warped the pulley outward away from the trans. There might be something else wrong that im not seeing, but im pretty sure that this is my issue. Im not getting enough throw out of the release fork. any help is greatly appreciated. thx. _billy |
   |
 
|
Posts in this topic
RS22b Who makes a metal clutch cable pulley? Jul 23 2007, 08:50 AM
GWN7 I only know of one metal one in existance. It was ... Jul 23 2007, 11:35 AM RS22b thanks for the heads up.
If i cant find one alre... Jul 23 2007, 12:26 PM GWN7 Take a plastic one to a machine shop......they sho... Jul 23 2007, 12:46 PM RS22b maybe will. The car is getting towed to the shop t... Jul 23 2007, 07:27 PM Dr Evil I have a spare stock one if you need it for mock u... Jul 23 2007, 07:39 PM mike373 I could have swore that I saw someone who makes th... Jul 23 2007, 11:07 PM
brant
I could have swore that I saw someone who makes t... Jul 23 2007, 11:33 PM Type 4 Unleashed
Had a slight issue over the weekend with my stock... Jul 23 2007, 11:30 PM Dr Evil
Had a slight issue over the weekend with my stoc... Jul 23 2007, 11:40 PM Larry Hubby You mean, like this...
Jul 24 2007, 01:26 AM sean_v8_914 seems like a bandaid. my V8 car has a Kenedy stage... Jul 24 2007, 01:52 AM toomanyinkc The one on my car is metal and caused plenty of gr... Jul 24 2007, 07:14 AM Travis Neff Michael Wills (MOVEQIK) has one on his car, dunno ... Jul 24 2007, 02:25 PM GWN7
Michael Wills (MOVEQIK) has one on his car, dunno... Jul 24 2007, 05:56 PM brant
Michael Wills (MOVEQIK) has one on his car, dunn... Jul 25 2007, 02:39 AM Brian Mifsud Plastic works fine as long as it is not under a si... Jul 24 2007, 02:49 PM Cap'n Krusty If it's hot enough the melt the pulley, what... Jul 24 2007, 06:02 PM GeorgeRud Contact Patrick Motorsports in Phoenix, AZ. They ... Jul 24 2007, 09:20 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th June 2024 - 10:17 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.