 Please Help with brakes |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| RonnieJ |
 Aug 5 2007, 12:06 PM
Post
#1
|
|
RonnieJ  Group: Members Posts: 230 Joined: 16-June 03 From: Sterling Heights, Michigan Member No.: 829 Region Association: Upper MidWest  |
I just removed my rear brake pads that where pretty much rusted to the pistons and rotors from two years of storage. The pistons where not moving. I got the pads out and when I tried to adjust the pistons with the adjuster screws I lost some fluid and the pistons tightened up on the rotors with no pads on. What do I do. It seems that when I try to adjust the pistons in and out I'm not getting any movement. I've never tried this before and it's very frustrating right now. Any help, suggestions or even a picture of how I'm supposed to tackle this would be very much appreciated. Exactly how do you use the adjusters? do I loosen the nut and then use the hex screw. As you can tell I'm totally lost. Thanks
|
   |
 
|
Posts in this topic
RonnieJ Please Help with brakes Aug 5 2007, 12:06 PM
Eric_Shea Hi Ronnie,
Let's start with a how-to on the a... Aug 5 2007, 12:20 PM RonnieJ When I loosened the 13mm nut and turned the hex sc... Aug 5 2007, 01:08 PM Eric_Shea First of all, they need to be rebuilt. Leaking fl... Aug 5 2007, 01:16 PM RonnieJ Thanks,
Looks like I need a rebuild. I'm down... Aug 5 2007, 02:16 PM Eric_Shea Small, small world. We used to keep our boat in S... Aug 5 2007, 02:46 PM RonnieJ Eric,
Thanks, It's a small world. I bought my... Aug 5 2007, 03:15 PM Eric_Shea It's up to you... I can restore them for you o... Aug 5 2007, 03:23 PM RonnieJ What do you charge for a rebuild? You can post it ... Aug 5 2007, 03:26 PM
Eric_Shea It's in that link in my previous thread. That... Aug 5 2007, 03:28 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 3rd July 2025 - 04:37 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.