 914 with 911 Front end- Which Strut inserts? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Jeff Hail |
 Aug 27 2007, 01:05 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,141 Joined: 3-May 07 From: LA/ CA Member No.: 7,712  |
Have a question that I have not seen posted yet....
914 with a 1988 Carerra front end (Boge struts, bigger brakes and control arms with underbody sway bar. Popular upgrade for a 5 lug. Question: What inserts would be the correct pick for the front? 911 or 914? I am going with Koni adjutables and all the manufacturers Bilstein, Koni, Boge have different part numbers for the inserts for the 911 and 914 because of different valving. Anything else I should be aware of? Any problem using the new replacement 914 inserts in the Carerra/ Boge strut tubes? Are the tube dimensions the same. All I can see visually that is different is the crown nut securing the insert. Should I just order the 914 strut inserts for Boge tubes and go? |
   |
 
|
Posts in this topic
Jeff Hail 914 with 911 Front end- Which Strut inserts? Aug 27 2007, 01:05 AM
blitZ There's a pretty good article on Road Glue, mi... Aug 27 2007, 11:38 AM Richard Casto Jeff,
I have been trying to document much of what... Aug 27 2007, 03:29 PM Eric_Shea Hi Jeff:
:wttc:
I don't believe there are ... Aug 27 2007, 05:05 PM
Jeff Hail
Hi Jeff:
:wttc:
I don't believe there are ... Aug 27 2007, 05:38 PM Jeff Hail From Dave at TRE Motorsports.
Use the correct yea... Aug 27 2007, 08:53 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 23rd May 2024 - 05:14 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.