 Taco plate, Original finish? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
Model Specific Information
914/4: 70 71 72 73 74 75 76 914/6: 70 71 72
| Pat Garvey |
  Oct 28 2007, 07:54 PM
Post
#1
|
|
Do I or don't I...........?  Group: Members Posts: 5,899 Joined: 24-March 06 From: SE PA, near Philly Member No.: 5,765 Region Association: North East States  |
I posted this on the Garage & got no response, so I'll try here.
Taco plate - sans sender. What's the original finish? Mine has a semi-gloss finish, and it hasn't been repainted, but it has been polished through the years. Getting ready to pull it to replace the seal - so what are the torque settings on the nuts, as well as the original finish? Most importantly, what are the torque settings - can't find this in my spec book!? Pat |
   |
 
|
Posts in this topic
Pat Garvey Taco plate Oct 28 2007, 07:54 PM
slackin' at work
I posted this on the Garage & got no response... Oct 29 2007, 09:14 AM davep It is the plate that holds the optional oil temper... Oct 29 2007, 09:38 AM Ferg Torque setting on the two bolts is 6-8lbs IIRC ve... Oct 29 2007, 10:51 AM
Pat Garvey
Torque setting on the two bolts is 6-8lbs IIRC v... Oct 29 2007, 07:38 PM
Pat Garvey
Torque setting on the two bolts is 6-8lbs IIRC v... Nov 4 2007, 08:24 PM McMark I was at my local ACE hardware and I saw a can of ... Nov 4 2007, 11:11 PM Pat Garvey
I was at my local ACE hardware and I saw a can of... Nov 5 2007, 06:52 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 15th June 2024 - 10:52 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.