 fitting a mallory unilite... |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| slackin' at work |
 Nov 4 2007, 01:48 PM
Post
#1
|
|
i should be working  Group: Members Posts: 265 Joined: 12-October 07 From: charlottesville, va Member No.: 8,215 Region Association: MidAtlantic Region  |
I tried searching and seems all the posts I found were about hooking it up...
so I assume it can fit in there. but as I was looking and about to plop it in, it looks like the tin is in the way since it is a larger diameter than the current 009. the 009 is right up against it. so what does everyone else do here? do I just take a BFH and make room? (IMG:style_emoticons/default/smash.gif) |
   |
 
|
Posts in this topic
slackin' at work fitting a mallory unilite... Nov 4 2007, 01:48 PM
StratPlayer No expert here, but from reading past post on this... Nov 4 2007, 01:53 PM
slackin' at work
No expert here, but from reading past post on thi... Nov 4 2007, 02:58 PM Gint Beat the tin in a little bit with a hammer where i... Nov 4 2007, 02:29 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd June 2024 - 07:50 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.