 Nuts!, 914/6 with headers...how do you get to this one? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Wanna9146 |
 Jan 30 2008, 09:00 PM
Post
#1
|
|
Member  Group: Members Posts: 235 Joined: 19-January 08 From: Florida Member No.: 8,595 Region Association: South East States  |
I have headers on my 914/6 and, due to the bends, can't get to the outer header/exhaust nut on the middle cylinder (passenger side). I tried a wobble socket and a u-joint with no luck. Is there a special tool for this?
(IMG:style_emoticons/default/blink.gif) |
   |
 
|
Posts in this topic
Wanna9146 Nuts! Jan 30 2008, 09:00 PM
Root_Werks Makes a difference, factory heater boxes or header... Jan 30 2008, 09:03 PM
Wanna9146
Makes a difference, factory heater boxes or heade... Jan 30 2008, 10:35 PM 356 I used a curved box wrench....custom heated and cu... Jan 30 2008, 10:23 PM Rusty Are you using the barrel nuts or standard copper e... Jan 30 2008, 10:42 PM Wanna9146
Are you using the barrel nuts or standard copper ... Jan 30 2008, 11:14 PM John Mine have long enough studs that I did this:
I dr... Jan 31 2008, 12:15 AM Wanna9146
I drilled out an allen head nut and use it as a s... Jan 31 2008, 12:22 AM sww914 I use a 1/4" drive 12mm socket and a universa... Jan 31 2008, 03:17 AM Wanna9146
I use a 1/4" drive 12mm socket and a univers... Jan 31 2008, 07:56 AM Root_Werks I couldn't find the wrench that I have, but so... Jan 31 2008, 10:31 AM Wanna9146
I couldn't find the wrench that I have, but s... Jan 31 2008, 09:30 PM ClayPerrine They should have attached it with the proper barre... Jan 31 2008, 10:39 AM Wanna9146
They should have attached it with the proper barr... Jan 31 2008, 09:42 PM iamchappy I had headers like that and i ground the top of on... Jan 31 2008, 04:24 PM John I would not suggest using barrel nuts on a HEADER ... Jan 31 2008, 10:15 PM Wanna9146
I would not suggest using barrel nuts on a HEADER... Jan 31 2008, 11:04 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th June 2024 - 01:34 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.