 Rear Brakes, Inner Adjuster Came Out |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| jgara962 |
 Feb 24 2008, 02:09 PM
Post
#1
|
|
Yo, this is how I roll  Group: Members Posts: 823 Joined: 5-April 05 From: Napa, CA Member No.: 3,879 Region Association: Northern California  |
I'm taking my rear brake pads out which I had done and was in the process of pushing back the pistons while turning the adjusters. I guess I turned the inner one a little too much because it came all the way out which I discovered when I removed the hex and the adjuster was still attached. Problem, or do I just put it back in?
Also, I'm using a flat piece of metal to press back the pistons, but they don't seem to want to go back all of the way. Any tips? I'm afraid to keep pressing on them and damaging something. |
   |
 
|
Posts in this topic
jgara962 Rear Brakes Feb 24 2008, 02:09 PM
McMark The rear adjuster comes out. Nothing holds it in.... Feb 24 2008, 02:21 PM
jgara962
The rear adjuster comes out. Nothing holds it in... Feb 24 2008, 02:50 PM davep
Maybe it's time to just show it who's bos... Feb 24 2008, 04:09 PM jgara962
Maybe it's time to just show it who's bo... Feb 24 2008, 04:14 PM McMark The mechanism that the adjuster screws into (think... Feb 24 2008, 02:58 PM McMark Are you using a c-clamp to press the piston? Feb 24 2008, 02:59 PM jgara962
Are you using a c-clamp to press the piston?
No... Feb 24 2008, 03:09 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 16th June 2024 - 11:52 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.