 Which tranny? 901 or 915, For my 914-8 buick 215? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| JRust |
 Mar 8 2008, 08:05 PM
Post
#1
|
|
914 Guru  Group: Members Posts: 6,307 Joined: 10-January 03 From: Corvallis Oregon Member No.: 129 Region Association: Pacific Northwest 
 |
So I have my new 914-8. It has the buick 215 as stated in my other post & above. I need to replace the clutch as it is slipping badly. The shifting also is extremely sloppy. I have a good 915 along with an complete 5-lug set-up I want to use. The rear 5-lug has the early 911 hubs & uses the thicker 911 axles. I pulled these out of a six conversion that had a engine fire. So although I don't have a history on the tranny I am sure it is good.
My question is the 915 a good transmision for this set-up? Or should I have a good 901 rebuilt for my purpose. I know a sideshift is a better tranny anyway. Is the switch easy enough? I'm a little concerned with the engine mount for the buick being in the way? Thanks |
   |
 
|
Posts in this topic
JRust Which tranny? 901 or 915 Mar 8 2008, 08:05 PM
LvSteveH I would think going to a nice side shift with an H... Mar 8 2008, 10:10 PM
rick 918-S
I would think going to a nice side shift with an ... Mar 8 2008, 11:02 PM PRS914-6 I would think the "big picture" If you ... Mar 8 2008, 10:19 PM JRust Here are a couple pics. This came off a 2.7 6 conv... Mar 8 2008, 10:28 PM Jeff Hail
Here are a couple pics. This came off a 2.7 6 con... Mar 8 2008, 11:59 PM Gary
Here are a couple pics. This came off a 2.7 6 con... Mar 9 2008, 08:46 AM Dr Evil
Here are a couple pics. This came off a 2.7 6 co... Mar 9 2008, 09:00 AM michaelt55 As far as the first gear and the 215's torque,... Mar 9 2008, 09:28 AM JRust Looks like your 901 has the coarse-spline 915 outp... Mar 9 2008, 12:10 PM jimkelly looks like running a 930 upside down is the way to... Mar 8 2008, 10:30 PM Phoenix 914-6GT That is a 901. Mar 8 2008, 10:59 PM JRust I think I will stick with the motor :blink: .
... Mar 8 2008, 11:07 PM Phoenix 914-6GT Yeah, when running higher hp engines it is best to... Mar 8 2008, 11:14 PM JRust The Empi's do look okay. The 185's that ar... Mar 8 2008, 11:37 PM LarryR well I would say 915 ... that is ~ a 3.6 car so I ... Mar 8 2008, 11:42 PM Dr Evil A 901 will be fine for your engine. I just built a... Mar 9 2008, 12:12 AM JRust
A 901 will be fine for your engine. I just built ... Mar 9 2008, 12:35 AM PRS914-6 I really don't understand the concept of remov... Mar 9 2008, 08:32 AM Dr Evil
I really don't understand the concept of remo... Mar 9 2008, 08:59 AM PRS914-6 There is a coarse spline 108 mm that came in earl... Mar 9 2008, 09:13 AM charliew Michaelt55 I watched a little pontiac for about 20... Mar 9 2008, 09:53 AM michaelt55
Michaelt55 I watched a little pontiac for about 2... Mar 9 2008, 12:13 PM JRust
slightly smaller in size, not much, cause its the... Mar 9 2008, 12:20 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 7th June 2024 - 02:31 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.