 anyone know weber 34 ICT carbs? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| the4ork |
 Apr 10 2008, 09:34 PM
Post
#1
|
|
Newbie  Group: Members Posts: 22 Joined: 9-April 08 From: Lemoore,CA Member No.: 8,900 Region Association: None  |
the car runs great!!! when you got your foot in it...
but im having a hell of a time getting it to idle smoothe... if your familiar with them please help me out... i have to have the idle mixture all the way out almost, and the speed screw cranked in pretty good to get an idle... but this keeps it about 2k rpm, this is the only way to get a reliable idle... to get it down to about 900 i have to back out the idle jets from the carb, the big brass ones on the top side of the carb, with the o-ring... but if you back them out they move around while your driving and then the idles all screwed up again... im thinking my idle jets are too small, which is why backing them out helps... i think they are .52? jets i'll have to double check... but does it sound like im on the right track? and where the heck would i get jets for those things? also i pulled the plugs out and they are a little white, maybe i should get bigger idle and main jets? |
   |
 
|
Posts in this topic
the4ork anyone know weber 34 ICT carbs? Apr 10 2008, 09:34 PM
Trevorg7 I can tell you know more than me already but I too... Apr 10 2008, 09:47 PM sean_v8_914 do you have the balance tube between left/right ma... Apr 10 2008, 11:19 PM Elliot Cannon Pull the idle jets out and see if they are clogged... Apr 10 2008, 11:30 PM
sww914
Pull the idle jets out and see if they are clogge... Apr 11 2008, 12:50 PM SirAndy
the car runs great!!! when you got yo... Apr 11 2008, 12:37 AM Mark Henry
there's a reason why those are nicknamed ... Apr 11 2008, 03:53 PM reverie Are they like these ones? Dual 34 ICTs with 29mm ... Apr 11 2008, 02:56 AM the4ork
Are they like these ones? Dual 34 ICTs with 29mm... Apr 11 2008, 03:06 AM BarberDave :trophy:
The 34 Ict's Are really to small fo... Apr 11 2008, 06:47 AM Al Meredith Are these the carbs that have the electrical cut o... Apr 11 2008, 02:34 PM rhodyguy go buy the cbperformance weber book. the 34 ICTs a... Apr 11 2008, 02:52 PM the4ork yeah... i'll try and spray them out some more.... Apr 12 2008, 06:03 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 16th June 2024 - 08:38 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.