 Battery tray pedestal, What are these holes for? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| watsonrx13 |
 May 3 2008, 07:07 PM
Post
#1
|
|
Advanced Member  Group: Members Posts: 2,734 Joined: 18-February 03 From: Plant City, FL Member No.: 312 Region Association: South East States  |
OK, I've removed the old battery tray/pedestal, both had either either pop-riveted or sheet metal screws to hold them.. Anyway, I welded up the extraneous holes, but what are these small holes in the front for? Also, what's the purpose of the large holes on the sides? (RD design). BTW, the pic is from my current driver, not the car I'm working on this weekend.
Also, do I need to remove the paint that is on the battery tray/pedestal? Or can I just scuff it and repaint?  -- Rob |
   |
 
|
Posts in this topic
watsonrx13 Battery tray pedestal May 3 2008, 07:07 PM
ericread The small holes are there as starter points for ru... May 3 2008, 07:56 PM Eric_Shea Resistor block.
http://www.pmbperformance.citymax... May 3 2008, 08:02 PM sixnotfour and dual relay May 3 2008, 08:06 PM
watsonrx13
and dual relay
Thanks guys. Which year/engine u... May 4 2008, 09:13 AM swl Thanks guys. Which year/engine used the dual relay... May 4 2008, 09:47 AM J P Stein 1) to let the acid in
or
2) to let the acid out May 3 2008, 09:23 PM Joe Mama Speed holes.... May 3 2008, 09:25 PM iamchappy Generally i have found that paint does not adhere ... May 3 2008, 09:28 PM So.Cal.914 Bird House... :)
May 3 2008, 09:49 PM KELTY360
Bird House... :)
:rotfl: :rotfl:
Looks l... May 3 2008, 11:20 PM So.Cal.914 :rotfl: May 3 2008, 11:43 PM Eric_Shea
:confused: If I recall, I had a 74 1.8 that had... May 4 2008, 09:16 AM SLITS In the original design, the larger hole was for an... May 4 2008, 09:25 AM Headrage On my '75 that's where my rev limiter was ... May 4 2008, 09:31 AM So.Cal.914
I can see that... :rolleyes:
May 4 2008, 10:05 AM Cevan RE: Battery tray pedestal May 4 2008, 01:49 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th June 2024 - 05:16 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.