 Problem with valve covers., This can't be a first.... |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| KaptKaos |
 May 21 2008, 12:05 AM
Post
#1
|
|
Family  Group: Members Posts: 4,009 Joined: 23-April 03 From: Near Wausau Member No.: 607 Region Association: Upper MidWest  |
My motor is a 1911 I got used. It has a carb cam of unknown spec. It runs pretty good. The valve adjusters are a swivel foot style adjuster and the top of the adjuster whacks the inside of the valve cover. This does two things. First, it eventually breaks a hole in the cover. Second, the tapping causes the valve cover to lift ever so slightly from the head, allowing the gasket to buckle a little and leak oil.
I assume I could swap out the adjusters with stock ones or I can cut the adjusters to make them a smidge shorter and re-tap them to make sure I can still use them. I was wondering if there is an option for a taller valve cover of some sort? I've seen screw on covers, but I am not sure how those work or if they provide any more clearance. Here is a picture of a busted valve cover from the last time this happened.  TIA |
   |
 
|
Posts in this topic
KaptKaos Problem with valve covers. May 21 2008, 12:05 AM
JB 914 Joe i have a set of valve covers that are not stoc... May 21 2008, 01:32 AM Gint I'm no expert, but I'm going to go out on ... May 21 2008, 07:09 AM SGB I think so too. Sounds like some kind of shim is ... May 21 2008, 08:06 AM HAM Inc Shorten the screws. It's that simple. That... May 21 2008, 08:45 AM Vacca Rabite if you shorten the screws, don't you have to b... May 21 2008, 09:02 AM r_towle yes balance matters.
BUT
its alot better to have a... May 21 2008, 09:07 AM
KaptKaos I'll check with Jake :D
This is one of those ... May 21 2008, 09:24 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 15th June 2024 - 08:00 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.