Oil cooler removal |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Oil cooler removal |
Curvie Roadlover |
Mar 26 2003, 12:04 PM
Post
#1
|
Two trunks are better than one! Group: Members Posts: 2,025 Joined: 29-December 02 From: Southeast Michigan Member No.: 42 |
OK, I'm attempting to replace my oil cooler seals on my '76 2.0 in an attempt to fix my oil leak problem. The engine is out of the car, the tin is off, except the piece directly over the cooler. This piece goes all the way from the top of the oil cooler to below the pushrod tubes. I'm told this piece of tin has to go on the engine before the cylinders go on, so I'm assuming I can deal with the cooler with this piece still on the engine. I've removed the 2 13mm bolts that hold the coolers' outboard bracket to the fan shroud. I've also removed the 2 10 mm nuts on the forward side of the cooler. It isn't even loose at this point. What else do I have to do to get the oil cooler off? (IMG:style_emoticons/default/blink.gif)
Thanks in advance, Perplexed in Michigan |
Lo-Fi Version | Time is now: 12th June 2024 - 07:29 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |