 Throttle body leak |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 415PB |
 Feb 5 2004, 06:41 PM
Post
#1
|
|
Member  Group: Benefactors Posts: 498 Joined: 7-August 03 From: So Cal Member No.: 996   |
Once the AAR kicks off after warm, the idle hunts from 1000 to 0 RPM. I changed the vacuum lines and it still hunts. So I tried the starting fluid trick and sprayed it at the base of the throttle body. The idle held right at 1000 rpm until the starting fluid dissipated and then it began to hunt again. I did this several times with the same results. Do you think Threebond 1104 can be used and work at the base of the throttle body? I ordered the gasket several months ago, but it has been on back order or is not available (cant remember which).
Thanks for the help. |
   |
 
|
Posts in this topic
415PB Throttle body leak Feb 5 2004, 06:41 PM
SirAndy make sure it's not cracked. :(
they do that ... Feb 5 2004, 06:43 PM 415PB Thanks Andy, I will do that now, but how about the... Feb 5 2004, 06:45 PM SirAndy Brad Roberts The 2.0 intake plenum cracks around the two suppor... Feb 5 2004, 07:06 PM 415PB The throttle body appears okay with no cracks. I ... Feb 5 2004, 07:55 PM Bleyseng Yes, plus check the throttle shaft for slop. The d... Feb 5 2004, 08:05 PM Brad Roberts Use sealant on the gasket.. no reason not to use t... Feb 5 2004, 08:10 PM 415PB Okay, I used the sealant on the old gasket and it ... Feb 5 2004, 09:00 PM Brad Roberts You have multiple leaks in multiple area's. Th... Feb 5 2004, 09:03 PM
Bleyseng Do you have the vacuum retard and vacuum advance h... Feb 6 2004, 12:40 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 7th June 2024 - 04:28 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.