 Injector Size for SDS?, Need help on injectors |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Joe Owensby |
 Sep 28 2008, 11:22 AM
Post
#1
|
|
JoeO  Group: Members Posts: 527 Joined: 7-January 06 From: Spartanburg, SC Member No.: 5,385 Region Association: South East States  |
Planning to put a SDS on a 2 liter engine. I intend to use a 2 liter manifold, fuel rail, etc. which I have. I want to put in new injectors as I install this. In browsing around, it looks as if the 2 liter injectors are becomming obsolete or unavailable soon. The 1.8 Ljet injectors seem to be the most commonly used ones on Porsches and other cars. For example, Advance auto has these for $46.00 new, made by Niehoff. Is anyone familiar with Niehoff injectors, and are they good quality?
It seems as if the time to upgrade for long term parts availability is now, as the new control system will be tuned in to the injector size. Is this a good choice? Will the 1.8 Ljet injectors fit the '73 fuel rails and manifold tubes? Are the connectors on these the same as the Ljet connectors being offered with the new aftermarket control systems. Your advice is greatly appreciated. Or, does anyone have any better suggestion? Thanks in advance, JoeO |
   |
 
|
Posts in this topic
Joe Owensby Injector Size for SDS? Sep 28 2008, 11:22 AM
Mark Henry L-jet injectors have a very low flow rate, they wi... Sep 28 2008, 11:42 AM
Joe Owensby Do you have the flow rate for the 1.8 injectors? ... Sep 28 2008, 12:01 PM r_towle Send your 2.0 liter injectors out for cleaning, re... Sep 28 2008, 02:15 PM Mark Henry 1.8 are even less than the 1.7 injectors. I've... Sep 29 2008, 11:15 AM r_towle Is there a difference in impedence between L-jet a... Sep 29 2008, 11:44 AM Mark Henry
Is there a difference in impedence between L-jet ... Sep 29 2008, 12:37 PM Joe Owensby Thanks for the info. I have been doing some diggi... Oct 6 2008, 10:46 PM toon1 why don't you go with a different inj. all tog... Oct 6 2008, 11:56 PM ottox914 Joe, if you are staying w/a stock motor, the stock... Oct 7 2008, 07:26 AM toon1 While having the Inj's cleaned is a good thing... Oct 7 2008, 09:17 AM Joe Owensby Yes, I would like to see a photo of the Ford Injec... Oct 7 2008, 02:59 PM r_towle You may want to give these guys a call.
they would... Oct 7 2008, 03:18 PM Mark Henry A low impedance SDS system comes with the resistor... Oct 7 2008, 09:40 PM Joe Owensby Thanks for the help.
I found some of the basic in... Oct 10 2008, 10:25 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 01:05 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.