 Hub removal, Mashed em up a bit |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| echocanyons |
 Feb 14 2004, 01:37 PM
Post
#1
|
|
Advanced Member  Group: Benefactors Posts: 2,094 Joined: 24-December 02 From: Bay Area, CA Member No.: 7 Region Association: Central California 
 |
I removed a pair of rear hubs from a 71 911. One gave pretty easily with the Eric Shea method using an old tbar and a BFH.
the other one took a whole lot more convincing to come loose. After about an hour of whacking with the tbar and BFH I switched to a impact socket that fit nicely in the partially removed bearing. With the torsion bar and the socket I mashed the back of the hub a bit. Is this gonna be a problem when reusing the hub? |
   |
 
|
Posts in this topic
echocanyons Hub removal Feb 14 2004, 01:37 PM
Rich Bontempi If you mashed the edge of the hub that rides again... Feb 14 2004, 01:56 PM echocanyons it is the edge that rides against the stub axle
S... Feb 14 2004, 02:26 PM ! Yup.... Feb 14 2004, 02:27 PM Eric_Shea QUOTE
echocanyons Thanks again for the tip Eric, I would not have bu... Feb 14 2004, 02:43 PM Eric_Shea QUOTE
echocanyons Yup dont wanna do that Feb 14 2004, 03:07 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 15th June 2024 - 07:17 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.