 Overfilled Oil is my Front Seal Now trashed?, one quart more than capactiy, now leaks from front |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| budman5201 |
 Dec 7 2008, 11:53 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 595 Joined: 1-April 07 From: tempe, az Member No.: 7,635  |
I dropped my engine over the past week to fix misc oil leaks....oil cooler, front main seal, and the pushrod tubes. All leaked looked fixed but i accidentally overfilled oil by one quart. (drained oil while on ramps, and then refilled with 4 quarts) So i believe that there was one quart still i there when i refilled it 4 quarts on oil change. The dipstick measured 1 quart overfilled when checked.
I only ran it 5 minutes on ramps to get it up to temperature to make sure everything was allright then shut off. The front main seal (looks like from the leak up front dripping from front of fan shroud) like it is leaking. It has a brand new front main seal, IS it TRASHED now? Of am i just seeing the left over oil from the initial overfill thats still in the fan shrould? It now measures EXACTLY right below top notch on dipstick, maybe a hair below.... It leaks still front front of engine, not as fast, but drips a lot. |
   |
 
|
Posts in this topic
budman5201 Overfilled Oil is my Front Seal Now trashed? Dec 7 2008, 11:53 PM
r_towle overfilling of oil wont create an oil leak.
What i... Dec 8 2008, 12:14 AM
budman5201
overfilling of oil wont create an oil leak.
What ... Dec 8 2008, 12:33 AM SLITS My guess would be that you cut the lips on the sea... Dec 8 2008, 08:09 AM Cap'n Krusty Overfilled? I've ALWAYS used 4 quarts with an... Dec 8 2008, 09:43 AM Al Meredith The "O" ring the Cap'n mentioned is... Dec 8 2008, 05:09 PM budman5201
The "O" ring the Cap'n mentioned i... Dec 8 2008, 05:29 PM jc914 I was about to post something very similar. I used... Dec 8 2008, 05:46 PM tod914 Mine started to leak much more when I put Brad Pen... Dec 8 2008, 05:53 PM Cap'n Krusty If you remove the front tin, you can get in there ... Dec 8 2008, 06:55 PM budman5201
If you remove the front tin, you can get in there... Dec 8 2008, 09:42 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 23rd May 2024 - 04:30 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.