 Starter/solenoid wiring, HELP!! |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| AlanR |
 Jan 29 2009, 06:56 PM
Post
#1
|
|
Newbie  Group: Members Posts: 2 Joined: 26-January 09 From: Bedford,Nova Scotia Member No.: 9,980 Region Association: None  |
Here's my problem. In my enthusiasm over dropping the engine on my 1974 FI 1.8 914, I neglected to properly note some wireing connections. Fortunately I have been able to find what I need from various sources, including this forum. But, I haven't found what I need concerning the starter/solenoid connections.
Here is what my setup looks like: The solenoid has 5 connections on the end - 2 are the nuts and 3 are male spades with 2 above the nuts and one below. The nut next to the starter has a connection into the starter body. Attached to the end of the starter is a small box with 5 male spade connectors like One on each side and one in the middle. Is anyone out there familiar with this setup? And if so, how should it be wired? Thanks, Alan |
   |
 
|
Posts in this topic
AlanR Starter/solenoid wiring Jan 29 2009, 06:56 PM
Cap'n Krusty A stock starter has 2 posts, one for battery power... Jan 29 2009, 07:09 PM AlanR
Since this doesn't remotely resemble a stock ... Jan 29 2009, 07:19 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 8th June 2024 - 08:24 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.