 Axle Nuts are Frozen Nuts |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| bandjoey |
 Apr 25 2009, 05:02 PM
Post
#1
|
|
bandjoey  Group: Members Posts: 4,926 Joined: 26-September 07 From: Bedford Tx Member No.: 8,156 Region Association: Southwest Region  |
Tried to pull off the rear axle nut - the big one with the cotter pin. Soaked it in pb blaster for a day and then used the 445lb. impact wrench - full power wouldn't budget the nut. Applied heat with a torch and still stuck. Other than cutting off the nut - both sides - any other suggestions? (IMG:style_emoticons/default/sawzall-smiley.gif) Bill
|
   |
 
|
Posts in this topic
bandjoey Axle Nuts are Frozen Nuts Apr 25 2009, 05:02 PM
J P Stein 3/4 inch breaker bar with a 5-6 foot cheater.
I ne... Apr 25 2009, 05:08 PM
Pat Garvey
3/4 inch breaker bar with a 5-6 foot cheater.
I n... Apr 26 2009, 06:53 PM Dr. Roger i always liked using a cold punch or chisel in the... Apr 25 2009, 05:08 PM dangrouche [quote name='Dr. Roger' date='Apr 25 2... Apr 25 2009, 05:33 PM PanelBilly My ex-father-in-law has a tool bench loaded with B... Apr 25 2009, 05:21 PM kwales I got a 4 foot long pipe wrench if all else fails.... Apr 25 2009, 05:38 PM SUNAB914 Super Long braker bar. Get it, it will come. Apr 25 2009, 07:20 PM rdauenhauer Its actually not really that bad, but you have to ... Apr 25 2009, 09:11 PM bandjoey Glad I'm not the only one needing a cheater. ... Apr 25 2009, 09:30 PM VOX we had the same problem with one of our castle nut... Apr 25 2009, 10:30 PM Cap'n Krusty
we had the same problem with one of our castle nu... Apr 26 2009, 08:29 AM dbgriffith75
Tried to pull off the rear axle nut - the big one... Apr 26 2009, 07:14 AM ConeDodger I had one side come off without too much trouble b... Apr 26 2009, 07:18 AM jaxdream If it's that hard to get off , then chances ar... Apr 26 2009, 08:38 AM bandjoey s
If it's that hard to get off , then chances ... Apr 26 2009, 09:40 AM type2man I use a 36mm socket welded to a piece of iron, hav... Apr 26 2009, 10:17 AM VOX thanks cap'n thought wd-40 was just lubricant,... Apr 26 2009, 02:58 PM firstknight13 :D i just did this...works just fine..... :D Apr 26 2009, 06:46 PM firstknight13 :D so i put the nuts on the lugs and took my pick ... Apr 26 2009, 06:50 PM bandjoey couldn't work on mine today...honeydo day...bu... Apr 26 2009, 08:27 PM Cupomeat Having someone to be inside and stand on the brake... Apr 26 2009, 08:32 PM wobbletop 3' breaker bar parallel to the ground. Use a f... Apr 26 2009, 08:43 PM Gint I just bought a 600 ft/lb impact wrench. Haven... Apr 26 2009, 09:13 PM charliew Sometimes I place the breaker bar against the grou... Apr 26 2009, 09:51 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 3rd June 2024 - 04:37 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.