 had it running...lost it, kiilled it again |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| nycchef |
 Jun 15 2009, 03:10 PM
Post
#1
|
|
mechanical moron  Group: Members Posts: 952 Joined: 28-November 05 From: new york city n.y. Member No.: 5,202 Region Association: None  |
was trying to time my engine (2.0 weber 40's), had already set the dwell (45.5), when suddenly it stalled. seems i turned the dizzy to much. now i can't get it to fire, has spark,fuel, reset the points, put the engine @ #1 cyl tdc and put the dizzy in again with the rotor facing approx 11 oclock. am i right that the firing order 1432 starts withb the #1 cyl wire @ 1 oclock and follows clockwise? or is it 11 oclock, if so, what did i do wrong now.
thanks |
   |
 
|
Posts in this topic
nycchef had it running...lost it Jun 15 2009, 03:10 PM
neil30076
was trying to time my engine (2.0 weber 40's)... Jun 15 2009, 03:28 PM Cupomeat Rich,
As I cannot be sure that your dist drive is... Jun 15 2009, 03:29 PM
nycchef
Rich,
As I cannot be sure that your dist drive i... Jun 15 2009, 03:35 PM turnaround89 Depends on the distributor if its the original diz... Jun 15 2009, 04:04 PM nycchef
Depends on the distributor if its the original di... Jun 15 2009, 04:59 PM r_towle
Depends on the distributor if its the original d... Jun 15 2009, 05:10 PM nycchef new problem though the pass side forward stack on... Jun 15 2009, 05:19 PM neil30076
Depends on the distributor if its the original d... Jun 15 2009, 05:15 PM r_towle
[quote name='nycchef' post='1181028' date='Jun 15... Jun 15 2009, 05:18 PM r_towle Remove the drop links.
Neither one should be touch... Jun 15 2009, 05:27 PM r_towle For some this is a pain in the ass.
For me, I enjo... Jun 15 2009, 05:31 PM nycchef
For some this is a pain in the ass.
For me, I enj... Jun 15 2009, 05:53 PM SGB Rich is right. When it all comes together (valve ... Jun 15 2009, 06:12 PM nycchef
Rich is right. When it all comes together (valve... Jun 15 2009, 07:33 PM neil30076
Rich is right. When it all comes together (valv... Jun 15 2009, 07:40 PM turnaround89 do you have good gaskets, that will definitely lea... Jun 15 2009, 07:45 PM nycchef
do you have good gaskets, that will definitely le... Jun 15 2009, 08:30 PM r_towle 1 means you have a leak.
Find the leak, stop runni... Jun 15 2009, 09:02 PM Dr Evil This is why I am not in a hurry to come over. I kn... Jun 15 2009, 10:34 PM nycchef
This is why I am not in a hurry to come over. I k... Jun 16 2009, 06:39 AM nycchef
This is why I am not in a hurry to come over. I ... Jun 16 2009, 09:12 AM turnaround89 remove the stud and nut all together, and replace ... Jun 16 2009, 02:47 PM nycchef [quote name='turnaround89' date='Jun 1... Jun 16 2009, 03:49 PM turnaround89 i went and bought all new studs at autozone...i ha... Jun 16 2009, 05:31 PM nycchef
i went and bought all new studs at autozone...i h... Jun 16 2009, 06:34 PM turnaround89 I have a 1.7L. I think the 1.7 and 1.8 have 8 stu... Jun 16 2009, 06:38 PM nycchef , its really annoying to try to fix one thing but ... Jun 16 2009, 06:42 PM Dr Evil 2.0 have 6 all others have 8. Richie, you may want... Jun 16 2009, 06:45 PM nycchef
2.0 have 6 all others have 8. Richie, you may wan... Jun 16 2009, 08:12 PM r_towle the nut is spinning?
Its just not coming off?
Is i... Jun 16 2009, 08:45 PM nycchef
the nut is spinning?
Its just not coming off?
Is ... Jun 16 2009, 08:53 PM nycchef i"m baaack. so. got the nut off, stud is toas... Jun 17 2009, 01:04 PM r_towle Depth.
I set them in the head deep enough so you s... Jun 17 2009, 05:26 PM nycchef
Depth.
I set them in the head deep enough so you ... Jun 17 2009, 05:54 PM scottb rich (mr chef),
get that pig running and come up ... Jun 17 2009, 06:04 PM nycchef
rich (mr chef),
get that pig running and come up... Jun 17 2009, 09:15 PM r_towle I told you....pick a weekend...provide me a couch ... Jun 17 2009, 09:34 PM nycchef
I told you....pick a weekend...provide me a couch... Jun 17 2009, 10:43 PM r_towle
I told you....pick a weekend...provide me a couc... Jun 18 2009, 05:04 PM nycchef
[quote name='nycchef' post='1182268' date='Jun 18... Jun 18 2009, 06:45 PM type11969 Leo finally got that 2073 done? I don't believ... Jun 18 2009, 08:31 AM Dr Evil He must have brought the engine to the delivery ro... Jun 18 2009, 11:43 AM nycchef
He must have brought the engine to the delivery r... Jun 18 2009, 02:42 PM type11969 914 2.0 in the bus? Hope not. Think those heads wi... Jun 18 2009, 02:56 PM Dr Evil Let me know and I will try to make it :) Jun 18 2009, 07:03 PM ME733 Seems like everyone ,i think, IS MISSING the obvio... Jun 18 2009, 07:39 PM nycchef
Seems like everyone ,i think, IS MISSING the obvi... Jun 18 2009, 08:59 PM nycchef
Seems like everyone ,i think, IS MISSING the obvi... Jun 19 2009, 08:40 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 6th June 2024 - 04:51 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.