 Targa Top Seal Questions. |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| kenshapiro2002 |
 Jul 26 2009, 01:38 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,441 Joined: 23-July 09 From: Bawlmer, MD Member No.: 10,598 Region Association: MidAtlantic Region  |
I've only had the car a few days and don't have another 914 handy for comparison, so thanks in advance for your help. Here goes...
1.) When the windows are fully up, they do not meet the side seals on the hardtop...mostly at the forward edge. I'm guessing this is probably due to shrinkage of the side seals and I should replace them? 2.) The rear seal on the top...the "U" shaped one that contacts the roll bar is pretty crapped out. I'm going to replace it. There's also some kind of foam tape stuff on the roll bar where it contacts the seal. I'm guessing this was an attempt by the previous owner to make that crappy top seal work, and I can take that off when I replace the seal. Am I correct? On another note, the rear window...did they have gaskets or are they simply "glued" into place and sealed? Mine looks like it was done by a drunk with some clear silicone sealant. Ken |
   |
 
|
Posts in this topic
kenshapiro2002 Targa Top Seal Questions. Jul 26 2009, 01:38 PM
rfuerst911sc Ken if you look in the vendors section mikey914 is... Jul 26 2009, 01:51 PM
kenshapiro2002 Thanks...appreciate the help. What about my questi... Jul 26 2009, 02:06 PM smontanaro The foam tape is almost certainly an "afterma... Jul 26 2009, 02:58 PM kenshapiro2002 Thanks.
Ken
The foam tape is almost certainly an... Jul 26 2009, 03:19 PM Mikey914 1.) When the windows are fully up, they do not mee... Jul 26 2009, 06:37 PM kenshapiro2002 Thanks...I'd give you the business, but I orde... Jul 26 2009, 07:47 PM Pat Garvey
I've only had the car a few days and don... Jul 26 2009, 08:16 PM kenshapiro2002 Pretty sure it'snot adjustment since the glass... Jul 26 2009, 08:41 PM CliffBraun That whole channel can be pivoted at the bottom us... Jul 26 2009, 09:58 PM CliffBraun That whole channel can be pivoted at the bottom us... Jul 26 2009, 09:58 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 7th June 2024 - 12:01 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.