 gas pedal woes, very stiff |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| nycchef |
 Jul 27 2009, 02:39 PM
Post
#1
|
|
mechanical moron  Group: Members Posts: 952 Joined: 28-November 05 From: new york city n.y. Member No.: 5,202 Region Association: None  |
installed a new cb performance linksage on my carbed 2.0, movement by hand is smooth, response nice and crisp, when i hooked up the accelorater cable, my gas pedal is extremely hard to press down, the cable is set all the way out at the engine bay, i checked in the center tunnel, near the cluster and it seems loose. could it be that the return spring on the carb linkage is too strong or is there a problem at the pedal cluster... or something else
|
   |
 
|
Posts in this topic
nycchef gas pedal woes Jul 27 2009, 02:39 PM
Millerwelds Sounds like the cable might be wrapped around one ... Jul 27 2009, 02:47 PM
Cap'n Krusty
Sounds like the cable might be wrapped around one... Jul 27 2009, 08:06 PM r_towle
Sounds like the cable might be wrapped around on... Jul 27 2009, 08:36 PM nycchef let me explain
i put the linkage on with the cable... Jul 27 2009, 10:30 PM Joe Sharp There is an inspection plate on the top front of t... Jul 27 2009, 03:02 PM SUNAB914 I had this happen with a brand new, I would say af... Jul 27 2009, 03:34 PM jt914-6 I wouldn't think that the return spring on the... Jul 27 2009, 04:00 PM nycchef
I wouldn't think that the return spring on th... Jul 27 2009, 04:29 PM jt914-6
I wouldn't think that the return spring on t... Jul 27 2009, 04:41 PM underthetire My pedal froze up from sitting. Rusted the hinge. ... Jul 27 2009, 04:44 PM nycchef
My pedal froze up from sitting. Rusted the hinge.... Jul 27 2009, 07:41 PM r_towle You have to play around with different spring stre... Jul 27 2009, 10:34 PM nycchef
You have to play around with different spring str... Jul 27 2009, 10:45 PM jt914-6 Rich, pop off the ball socket, #20, loosen the jam... Jul 28 2009, 06:31 AM nycchef
Rich, pop off the ball socket, #20, loosen the ja... Jul 28 2009, 07:51 AM SUNAB914 Pull the cable out and make sure it is slidding fr... Jul 28 2009, 07:12 AM ghuff I have this, I conjectured it was a sticky old cab... Jul 28 2009, 08:26 AM r_towle Rich,
There are two things that may keep it loose... Jul 28 2009, 05:41 PM nycchef
Rich,
There are two things that may keep it loos... Jul 28 2009, 07:56 PM jt914-6 Check all your pedal assm. bushings. If they are p... Jul 28 2009, 08:02 PM nycchef
Check all your pedal assm. bushings. If they are ... Jul 28 2009, 08:54 PM jt914-6 That would be #26.... Jul 28 2009, 09:07 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 7th June 2024 - 07:37 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.