 Head Gaskets |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| brandomc |
 Sep 16 2009, 04:48 PM
Post
#1
|
|
Member  Group: Members Posts: 113 Joined: 14-May 09 From: los angeles california Member No.: 10,363 Region Association: Southern California  |
I bought a engine last week that was supposedly a 1.7, but the guy didnt really know for sure. After looking at the case numbers, I think it might be a 1.8?? It starts with EB. I took all of the sheetmetal off to repaint it, and everything is really clean accept for around 1 of the cylinders between the head and the cylinder, it is black and kindof oily. I figure this is a leaky cylinder. Do i need new head gaskets? Or just retorque the head? Where do i get head gaskets? Pelican parts doesnt sell them. What should i do with this? It is supposed to be a fairly low mileage engine. Thanks
|
   |
 
|
Posts in this topic
brandomc Head Gaskets Sep 16 2009, 04:48 PM
southernmost914 EB is a 1973 1.7 Calif. motor according to my boo... Sep 16 2009, 05:00 PM Vacca Rabite It is surely a leak. If you did a compression and... Sep 16 2009, 05:06 PM
brandomc
It is surely a leak. If you did a compression an... Sep 16 2009, 05:12 PM Vacca Rabite
So, it sounds like i shoud take the head off and ... Sep 16 2009, 05:25 PM brandomc
So, it sounds like i shoud take the head off and... Sep 16 2009, 05:33 PM aircooledtechguy I would pull the head and see if there is a gasket... Sep 16 2009, 05:13 PM brandomc
I would pull the head and see if there is a gaske... Sep 16 2009, 05:21 PM Cap'n Krusty
I would pull the head and see if there is a gask... Sep 16 2009, 06:27 PM aircooledtechguy
I DO NOT agree. 36 Years of T4 experience, all ... Sep 17 2009, 11:11 AM r_towle If you have head gaskets, removing them will raise... Sep 16 2009, 05:50 PM Vacca Rabite Well, yes. In theory.
But, you are in LA. proba... Sep 16 2009, 05:54 PM brandomc Back to the begining; where can i get head gaskets... Sep 16 2009, 06:14 PM Vacca Rabite Auto Atlanta, GPR, pm Capt. Krusty for them.
Zach Sep 16 2009, 06:19 PM McMark If you insist on running them (WHY?) I probably ha... Sep 16 2009, 06:20 PM brandomc
If you insist on running them (WHY?) I probably h... Sep 16 2009, 06:26 PM brandomc So last night i ran a leak down test on this 1.7, ... Sep 17 2009, 10:32 AM McMark The EB motor is the lowest compression 1.7, too. ... Sep 17 2009, 11:36 AM Vacca Rabite What were the values that you were getting on the ... Sep 17 2009, 07:47 PM brandomc
What were the values that you were getting on the... Sep 18 2009, 10:43 AM Vacca Rabite
What were the values that you were getting on th... Sep 18 2009, 11:23 AM r_towle
[quote name='brandomc' post='1215876' date='Sep 1... Sep 18 2009, 03:12 PM Vacca Rabite
:poke: :poke: the first time? :poke: :poke:
... Sep 18 2009, 03:52 PM JazonJJordan
[quote name='r_towle' post='1215955' date='Sep 18... Sep 18 2009, 11:16 PM ME733 :popcorn: .....Well an 80..percent leakdown...soun... Sep 18 2009, 11:59 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd April 2026 - 09:16 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.