wheels, fake fuchs? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
wheels, fake fuchs? |
EdwardBlume |
Nov 11 2009, 11:44 PM
Post
#21
|
914 Wizard Group: Members Posts: 12,338 Joined: 2-January 03 From: SLO Member No.: 81 Region Association: Central California |
I left Steve a message earlier to call me... haven't gotten word back. I haven't told him about Mary or anything just yet as we've been trading PMs.
Rick, if you know Steve, do you want to work the deal? IMHO, he should jump on $500 for knock offs. Donald says he can ship for $50 for sure but will try and get it fully comp'ed from his boss when we know its a deal... his firm is Cherokee Freight Lines, and Steve just needs to be OK with putting the wheels on a pallet, securing them with tie downs and wrapping them as best as he can with plastic and tape. As far as fronting the cash, thanks Wayne.. perhaps you and Mike can firm up the need for that, and we can hand Steve off to you in a day or two. |
EdwardBlume |
Nov 11 2009, 11:47 PM
Post
#22
|
914 Wizard Group: Members Posts: 12,338 Joined: 2-January 03 From: SLO Member No.: 81 Region Association: Central California |
If Mary wants these and your fronting the cash Mike Lets make this work. I just sent Steve a PM and asked him to call me. If he's open to a deal I'll hand this off and let you you and Rob make the arrangements. With this in mind maybe we want to start the fund raising a week or two early. Lets talk about it on thursday. I'm down with that. Do we have a budget / goal amount firm? |
Kansas 914 |
Nov 12 2009, 07:52 AM
Post
#23
|
Advanced Member Group: Members Posts: 2,999 Joined: 1-March 03 From: Durango, Colorado Member No.: 373 Region Association: Rocky Mountains |
I'm down with that. Do we have a budget / goal amount firm? I would value Dr. Evil's input as to what is required to finish the car - I don't want to bias his thoughts with mine and a fresh view of the project is important. I can re-visit the budget at that point - but it isn't a million dollars - it is mostly time and knowledge. Great topic for the call tonight. |
rick 918-S |
Nov 12 2009, 09:55 AM
Post
#24
|
Hey nice rack! -Celette Group: Members Posts: 20,443 Joined: 30-December 02 From: Now in Superior WI Member No.: 43 Region Association: Northstar Region |
I met Steve at the WCC 05. Steve is one of the good guys. He hasn't called me yet but I will work the best deal I can. If it's ok with everyone I plan on telling him where the wheels are going but not about our group. I would prefer we keep it tight for now. I am only going to tell him there are a few of us that have been pm'ing in the back ground that want to send these to Mary. I'm sure he will get on board with the price.
Attached image(s) |
EdwardBlume |
Nov 12 2009, 10:54 AM
Post
#25
|
914 Wizard Group: Members Posts: 12,338 Joined: 2-January 03 From: SLO Member No.: 81 Region Association: Central California |
Thanks Rick. Here's Steve's contact info in case you need it:
cell 619-846-9147. steve@914.com I'll let Donald know there's a deal in the works. |
Kansas 914 |
Nov 12 2009, 11:03 AM
Post
#26
|
Advanced Member Group: Members Posts: 2,999 Joined: 1-March 03 From: Durango, Colorado Member No.: 373 Region Association: Rocky Mountains |
I met Steve at the WCC 05. Steve is one of the good guys. He hasn't called me yet but I will work the best deal I can. If it's ok with everyone I plan on telling him where the wheels are going but not about our group. I would prefer we keep it tight for now. I am only going to tell him there are a few of us that have been pm'ing in the back ground that want to send these to Mary. I'm sure he will get on board with the price. Once you make the deal - let me know and I will contact him for payment - will he prepare the wheels for shipping or is that something Donald will do? |
EdwardBlume |
Nov 12 2009, 11:38 AM
Post
#27
|
914 Wizard Group: Members Posts: 12,338 Joined: 2-January 03 From: SLO Member No.: 81 Region Association: Central California |
I met Steve at the WCC 05. Steve is one of the good guys. He hasn't called me yet but I will work the best deal I can. If it's ok with everyone I plan on telling him where the wheels are going but not about our group. I would prefer we keep it tight for now. I am only going to tell him there are a few of us that have been pm'ing in the back ground that want to send these to Mary. I'm sure he will get on board with the price. Once you make the deal - let me know and I will contact him for payment - will he prepare the wheels for shipping or is that something Donald will do? Donald is in TN. Steve will need to source a pallet, straps, plastic and tape and deliver it all to a Central Freight terminal. Here is the terminal in San Diego: Terminal: San Diego Address: 3495 Kurtz Street San Diego CA 92110 Phone: 619-523-9968 Division: Western Toll Free: 800-350-9994 Fax: 619-523-2478 Steve just called me... he does know Rick so I passed him on to Rick to talk further about Mary and the deal. I kept to Rick's earlier post on "a few guys helping out". Thanks, R |
rick 918-S |
Nov 12 2009, 02:26 PM
Post
#28
|
Hey nice rack! -Celette Group: Members Posts: 20,443 Joined: 30-December 02 From: Now in Superior WI Member No.: 43 Region Association: Northstar Region |
Thanks Rob, I just left him a voice mail.
|
rick 918-S |
Nov 13 2009, 04:15 PM
Post
#29
|
Hey nice rack! -Celette Group: Members Posts: 20,443 Joined: 30-December 02 From: Now in Superior WI Member No.: 43 Region Association: Northstar Region |
OK, We have a deal for the $ 500.00 I am handing this off to Mike to contact Steve and make money arrangements and shipping address and shipping arrangements.
I fore warned Steve he will need to mount these on a pallet,wrap them in plastic and get them to the shipping terminal. He didn't seem real confident about being able to locate a pallet. If this becomes an issue maybe they have a pallet at the shipping location and can help Steve get these to us. I told him there are a few of us working in the back ground to complete Marys brothers car. |
Kansas 914 |
Nov 13 2009, 07:02 PM
Post
#30
|
Advanced Member Group: Members Posts: 2,999 Joined: 1-March 03 From: Durango, Colorado Member No.: 373 Region Association: Rocky Mountains |
OK, We have a deal for the $ 500.00 I am handing this off to Mike to contact Steve and make money arrangements and shipping address and shipping arrangements. I fore warned Steve he will need to mount these on a pallet,wrap them in plastic and get them to the shipping terminal. He didn't seem real confident about being able to locate a pallet. If this becomes an issue maybe they have a pallet at the shipping location and can help Steve get these to us. I told him there are a few of us working in the back ground to complete Marys brothers car. Rob, Well done _ I will get in touch with Steve right away and at least pay for the wheels so he knows it is a real deal and then discuss the shipping - maybe Donald can help coordinate even from TN. (IMG:style_emoticons/default/smilie_pokal.gif) |
tat2dphreak |
Nov 13 2009, 09:11 PM
Post
#31
|
stoya, stoya, stoya Group: Benefactors Posts: 8,797 Joined: 6-June 03 From: Wylie, TX Member No.: 792 Region Association: Southwest Region |
local lumber stores usually have pallets, many they will give away or sell for $2-3
I used to work at a lumber yard (IMG:style_emoticons/default/smile.gif) |
EdwardBlume |
Nov 14 2009, 06:19 AM
Post
#32
|
914 Wizard Group: Members Posts: 12,338 Joined: 2-January 03 From: SLO Member No.: 81 Region Association: Central California |
I spoke with Donald last night and shipping is a done deal.
The name of the shipper is Central Freight Lines. I checked their website and it appears the closest terminal is Kansas City. Is there anyone in or near Kansas City that can pick them up? Donald thinks that the terminal in San Diego can supply a pallet and other supplies but I would recommend Steve try and show up with something to tie the wheels down and protect them somehow... ie plastic. |
rick 918-S |
Nov 14 2009, 11:56 AM
Post
#33
|
Hey nice rack! -Celette Group: Members Posts: 20,443 Joined: 30-December 02 From: Now in Superior WI Member No.: 43 Region Association: Northstar Region |
That's a long way yet. 400 miles. I wonder if we had to kick in a couple extra bucks if we could get a local shipper to get them to Garden city and Mary could pick them up a the local terminal there. If the first leg is only $ 50.00 or free, we wouldn't be upside down.
Rob, could you have Donald check into this for us? |
EdwardBlume |
Nov 14 2009, 04:18 PM
Post
#34
|
914 Wizard Group: Members Posts: 12,338 Joined: 2-January 03 From: SLO Member No.: 81 Region Association: Central California |
That's a long way yet. 400 miles. I wonder if we had to kick in a couple extra bucks if we could get a local shipper to get them to Garden city and Mary could pick them up a the local terminal there. If the first leg is only $ 50.00 or free, we wouldn't be upside down. Rob, could you have Donald check into this for us? Yep. Will do. |
Kansas 914 |
Nov 17 2009, 08:32 AM
Post
#35
|
Advanced Member Group: Members Posts: 2,999 Joined: 1-March 03 From: Durango, Colorado Member No.: 373 Region Association: Rocky Mountains |
UPDATE;
Steve Iverson contacted me and he has been paid. He was still struggling through the shipping process - but I told him that Donal would contact him and make it easy. Donald said he might just have to drop off the wheels at the terminal and they could take it from there. I think the SHIP TO point is still an issue. I know VITRAN ships between KC/MO and Wichita. |
rick 918-S |
Nov 17 2009, 12:42 PM
Post
#36
|
Hey nice rack! -Celette Group: Members Posts: 20,443 Joined: 30-December 02 From: Now in Superior WI Member No.: 43 Region Association: Northstar Region |
Good job Mike! Steve will get it done. He's a good guy. I wonder if Forward Air has a terminal close to the Central Freightlines. I have no experience with them but I have heard others post that their very well priced on large items.
I wonder if Marys Hubby can send the plane for them? (IMG:style_emoticons/default/idea.gif) Now that would be expensive! (IMG:style_emoticons/default/screwy.gif) (IMG:style_emoticons/default/biggrin.gif) |
Kansas 914 |
Nov 18 2009, 05:25 PM
Post
#37
|
Advanced Member Group: Members Posts: 2,999 Joined: 1-March 03 From: Durango, Colorado Member No.: 373 Region Association: Rocky Mountains |
Good job Mike! Steve will get it done. He's a good guy. I wonder if Forward Air has a terminal close to the Central Freightlines. I have no experience with them but I have heard others post that their very well priced on large items. I wonder if Marys Hubby can send the plane for them? (IMG:style_emoticons/default/idea.gif) Now that would be expensive! (IMG:style_emoticons/default/screwy.gif) (IMG:style_emoticons/default/biggrin.gif) I don't think Forward Air has a terminal in Wichita - I have tried to get a pinball machine shipped here before. Donald is checking with his people - he is just giving them Mary's address and see what they say - it might get shipped all the way to Garden City - we will wait and see! Mary also has a friend that is a long haul trucker that always dead heads the return (flat bed used to haul fiberglass underground fuel tanks for gas stations). He might can swing by on his way home if he is in the area - we will make it work somehow. |
Lo-Fi Version | Time is now: 5th May 2024 - 10:57 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |