 Koni Adjustable Spring Perch and Spring Size, What is the diff between stock and adj? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Zeke |
 Apr 3 2003, 07:43 PM
Post
#1
|
|
Never left, but not right....  Group: Members Posts: 381 Joined: 26-January 03 From: Long Beach CA Member No.: 197 Region Association: None  |
I have Konis on the rear. I want to add the adjustable threaded collar kits. I have to buy smaller diameter springs? What is the diameter of the spring that goes with the kit? If so, I have #160's and #180's for sale.
|
   |
 
|
Posts in this topic
Zeke Koni Adjustable Spring Perch and Spring Size Apr 3 2003, 07:43 PM
Jeroen IIRC the most used the inner diameter of the sprin... Apr 3 2003, 08:00 PM drew365 The perchs on my Bilsteins accept 2.5" springs. I... Apr 3 2003, 08:02 PM vortrex the springs I have for my koni adjustable coilover... Apr 3 2003, 08:05 PM drew365 My Eibach's are 10" and leave plenty of adjust... Apr 3 2003, 08:10 PM ChrisReale anybody have a pic of one of these set-ups? Apr 3 2003, 08:11 PM Zeke We need to be talking about diameter. Height is a ... Apr 3 2003, 08:29 PM vortrex mine is larger than 2.5 inches, hang on... Apr 3 2003, 08:31 PM vortrex the outer edge to outer edge diameter is 3.25".
t... Apr 3 2003, 08:32 PM Joseph Mills Same here. 10" length
3.25" OD
the coil wire is ap... Apr 3 2003, 08:47 PM Zeke Vortex and Joesph, you have these on threaded adju... Apr 3 2003, 08:49 PM vortrex yes sir I do. Apr 3 2003, 09:01 PM Joseph Mills seanery I have them too, 2.5 inside diameter. Got the whol... Apr 3 2003, 10:22 PM Brad Roberts Milt:
10 inch 2.5 I use Eibach and H&R. Call Jaso... Apr 4 2003, 01:36 AM Zeke campbellcj I have Bilsteins -- was gonna order the threaded c... Apr 4 2003, 03:00 PM Mueller Bilsteins= 1.970" OD
Koni Sport Yellow= 1.980" OD... Apr 4 2003, 03:05 PM brant I'm going to need some rear shocks...
mike, b... Apr 7 2003, 09:08 AM Racer Chris Milt,
What you have right now will be fine for th... Apr 7 2003, 11:33 AM Jeroen Hey Chris,
What size torsion and swaybar(s) are y... Apr 7 2003, 11:36 AM Racer Chris 
campbellcj OK...so for Bilsteins I guess the 2.04ID collar; 2... Apr 13 2003, 12:54 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 20th May 2024 - 06:38 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.