 Internal cavity protection (IN CARS), Eastwood product I haven't tried but might work |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| charliew |
 Jun 3 2010, 07:42 AM
Post
#1
|
|
Advanced Member  Group: Members Posts: 2,363 Joined: 31-July 07 From: Crawford, TX. Member No.: 7,958  |
This came in one of my email adds. It might be ok but I think the cavity still needs to be cleaned out and all excess flaking and bubbling rust and dirt removed first. The easyway would be to stick the sandblast nozzle up in it. Personally I will just use brush on coldgalvanizing if I can get to the area followed by a wax covering. I might use this on barely starting to rust areas after flushing them with a good cleaner and then metalready, then another flush and maybe this stuff. I haven't got any yet and haven't read the inst either to see if a follow up wax coat would help.
Just thought a few of you might be interested. Critics are welcome Oops forgot the link: http://www.eastwood.com/internal-frame-coa...tm_medium=email |
   |
 
|
Posts in this topic
charliew Internal cavity protection (IN CARS) Jun 3 2010, 07:42 AM
type11969 Got the same email, thought it looked good so I as... Jun 3 2010, 08:59 AM realred914 Eastwood chemicals are shit, they ruined two of my... Jun 3 2010, 12:24 PM veltror I plan to do the box sections when finished in Di... Jun 3 2010, 12:40 PM charliew I have used several eastwood products and have had... Jun 5 2010, 10:42 PM 9146986 Here's a brief description of what I do.
http... Jun 6 2010, 06:41 AM
Lennies914 Great thread Perry :beer1: The more I read the mo... Jun 6 2010, 05:17 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 3rd July 2025 - 10:38 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.