914 goes to the Mall, freeway miles! |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
914 goes to the Mall, freeway miles! |
dinomium |
Aug 28 2010, 01:22 PM
Post
#1
|
Git on a chair son, all the good stuff is goin over yer head! Group: Benefactors Posts: 2,777 Joined: 2-January 03 From: Bremerton, WA Member No.: 74 Region Association: Pacific Northwest |
So last weekend I met up with the local pinky lifters on their way for a nice Saturday drive. I was glad I made the trip up to say hi, but had to decline on the rest of the route to Port Townsend.
Green car got very hot (again) started missing badly (again) blue smoke screen (again) and also loss of brakes (ooh that is new) on the offramp on the way home. I have experienced that on the track but never on the open road and it was scary as hell! Leaky stripped bleeder screw was to blame on that last one... anyway it was good to be out and about with car people again, even if it was short lived. This coming Saturday there is a car show and Fly in for Labor Day out at the Bremerton Airport, if you can, stop by. Attached image(s) |
bmtrnavsky |
Aug 28 2010, 02:01 PM
Post
#2
|
Member Group: Members Posts: 355 Joined: 20-October 07 From: Longview, TX Member No.: 8,245 Region Association: Southwest Region |
So last weekend I met up with the local pinky lifters on their way for a nice Saturday drive. I was glad I made the trip up to say hi, but had to decline on the rest of the route to Port Townsend. Green car got very hot (again) started missing badly (again) blue smoke screen (again) and also loss of brakes (ooh that is new) on the offramp on the way home. I have experienced that on the track but never on the open road and it was scary as hell! Leaky stripped bleeder screw was to blame on that last one... anyway it was good to be out and about with car people again, even if it was short lived. This coming Saturday there is a car show and Fly in for Labor Day out at the Bremerton Airport, if you can, stop by. Was that a PCA run? That looks like my dads black 911... He lives in Port Orchard. |
messix |
Aug 28 2010, 02:55 PM
Post
#3
|
AKA "CLUTCH KILLER"! Group: Members Posts: 6,995 Joined: 14-April 05 From: between shit kickers and pinky lifters/ puget sound wa.north of Seattle south of Canada Member No.: 3,931 Region Association: Pacific Northwest |
|
dinomium |
Aug 28 2010, 05:48 PM
Post
#4
|
Git on a chair son, all the good stuff is goin over yer head! Group: Benefactors Posts: 2,777 Joined: 2-January 03 From: Bremerton, WA Member No.: 74 Region Association: Pacific Northwest |
I am doing pretty good Troy, thanks for asking! The car is carbed and they are just not happy and running rich, but the temp and blue smoke screen has me a little concerned.
|
sixnotfour |
Aug 28 2010, 06:05 PM
Post
#5
|
914 Wizard Group: Members Posts: 10,432 Joined: 12-September 04 From: Life Elevated..planet UT. Member No.: 2,744 Region Association: Rocky Mountains |
just a suggestion
A coworker has a 91 miata all the service has been done, new shocks, runs drives great. oh its for sale |
messix |
Aug 28 2010, 06:16 PM
Post
#6
|
AKA "CLUTCH KILLER"! Group: Members Posts: 6,995 Joined: 14-April 05 From: between shit kickers and pinky lifters/ puget sound wa.north of Seattle south of Canada Member No.: 3,931 Region Association: Pacific Northwest |
go get o'l smokey from dave and see how that runs.
|
dinomium |
Aug 29 2010, 12:26 AM
Post
#7
|
Git on a chair son, all the good stuff is goin over yer head! Group: Benefactors Posts: 2,777 Joined: 2-January 03 From: Bremerton, WA Member No.: 74 Region Association: Pacific Northwest |
|
DNHunt |
Aug 29 2010, 06:59 AM
Post
#8
|
914 Wizard? No way. I got too much to learn. Group: Members Posts: 4,099 Joined: 21-April 03 From: Gig Harbor, WA Member No.: 598 |
Smokey is just sitting in the garage. I turn it over by hand every now and then. It's always available on loan but I'll always want it back cause it numbers matches.
I hate tightening bleed screws. I always think just a little tighter and then it's too tight and it leaks. I may run up to Bremerton for part of the day. I've been staying pretty close to home cause Betsy is undergoing breast cancer treatment. SHE IS DOING REALLY WELL and her prognosis is excellent. I have a few more duties around here right now so, plans have to be flexible. Dave |
EdwardBlume |
Aug 29 2010, 07:35 AM
Post
#9
|
914 Wizard Group: Members Posts: 12,338 Joined: 2-January 03 From: SLO Member No.: 81 Region Association: Central California |
Tough day.. keep that pinky up!
|
ConeDodger |
Aug 29 2010, 08:14 AM
Post
#10
|
Apex killer! Group: Members Posts: 23,589 Joined: 31-December 04 From: Tahoe Area Member No.: 3,380 Region Association: Northern California |
just a suggestion A coworker has a 91 miata all the service has been done, new shocks, runs drives great. oh its for sale He'd have to loosen up his wrists though... (IMG:style_emoticons/default/laugh.gif) |
Eddie914 |
Aug 29 2010, 09:46 AM
Post
#11
|
Unregistered |
Dave,
Best wishes for Betsy! Eddie |
dinomium |
Aug 31 2010, 12:26 AM
Post
#12
|
Git on a chair son, all the good stuff is goin over yer head! Group: Benefactors Posts: 2,777 Joined: 2-January 03 From: Bremerton, WA Member No.: 74 Region Association: Pacific Northwest |
So last weekend I met up with the local pinky lifters on their way for a nice Saturday drive. I was glad I made the trip up to say hi, but had to decline on the rest of the route to Port Townsend. Green car got very hot (again) started missing badly (again) blue smoke screen (again) and also loss of brakes (ooh that is new) on the offramp on the way home. I have experienced that on the track but never on the open road and it was scary as hell! Leaky stripped bleeder screw was to blame on that last one... anyway it was good to be out and about with car people again, even if it was short lived. This coming Saturday there is a car show and Fly in for Labor Day out at the Bremerton Airport, if you can, stop by. Was that a PCA run? That looks like my dads black 911... He lives in Port Orchard. Is your dad the local PCA President? The owner is and a really nice guy. They are all great to hang out with in the Olympic Region, I must say |
dinomium |
Aug 31 2010, 12:28 AM
Post
#13
|
Git on a chair son, all the good stuff is goin over yer head! Group: Benefactors Posts: 2,777 Joined: 2-January 03 From: Bremerton, WA Member No.: 74 Region Association: Pacific Northwest |
Smokey is just sitting in the garage. I turn it over by hand every now and then. It's always available on loan but I'll always want it back cause it numbers matches. I hate tightening bleed screws. I always think just a little tighter and then it's too tight and it leaks. I may run up to Bremerton for part of the day. I've been staying pretty close to home cause Betsy is undergoing breast cancer treatment. SHE IS DOING REALLY WELL and her prognosis is excellent. I have a few more duties around here right now so, plans have to be flexible. Dave She is in our thoughts and Prayers, Dave. I just saw this, if you need any thing at all please give me a ring. |
messix |
Aug 31 2010, 12:31 AM
Post
#14
|
AKA "CLUTCH KILLER"! Group: Members Posts: 6,995 Joined: 14-April 05 From: between shit kickers and pinky lifters/ puget sound wa.north of Seattle south of Canada Member No.: 3,931 Region Association: Pacific Northwest |
Dave give her my best. my prayers are with you guys!
|
bmtrnavsky |
Aug 31 2010, 01:32 AM
Post
#15
|
Member Group: Members Posts: 355 Joined: 20-October 07 From: Longview, TX Member No.: 8,245 Region Association: Southwest Region |
So last weekend I met up with the local pinky lifters on their way for a nice Saturday drive. I was glad I made the trip up to say hi, but had to decline on the rest of the route to Port Townsend. Green car got very hot (again) started missing badly (again) blue smoke screen (again) and also loss of brakes (ooh that is new) on the offramp on the way home. I have experienced that on the track but never on the open road and it was scary as hell! Leaky stripped bleeder screw was to blame on that last one... anyway it was good to be out and about with car people again, even if it was short lived. This coming Saturday there is a car show and Fly in for Labor Day out at the Bremerton Airport, if you can, stop by. Was that a PCA run? That looks like my dads black 911... He lives in Port Orchard. Is your dad the local PCA President? The owner is and a really nice guy. They are all great to hang out with in the Olympic Region, I must say Lol... No, but he has a nice black 911 Targa, lives in your area and does a lot with the local PCA group... His name is Dan. |
6freak |
Aug 31 2010, 12:27 PM
Post
#16
|
MR.C Group: Members Posts: 4,740 Joined: 19-March 08 From: Tacoma WA Member No.: 8,829 Region Association: Pacific Northwest |
So last weekend I met up with the local pinky lifters on their way for a nice Saturday drive. I was glad I made the trip up to say hi, but had to decline on the rest of the route to Port Townsend. Green car got very hot (again) started missing badly (again) blue smoke screen (again) and also loss of brakes (ooh that is new) on the offramp on the way home. I have experienced that on the track but never on the open road and it was scary as hell! Leaky stripped bleeder screw was to blame on that last one... anyway it was good to be out and about with car people again, even if it was short lived. This coming Saturday there is a car show and Fly in for Labor Day out at the Bremerton Airport, if you can, stop by. Eric Breidenbach ...Black 911 owner |
VaccaRabite |
Aug 31 2010, 02:45 PM
Post
#17
|
En Garde! Group: Admin Posts: 13,444 Joined: 15-December 03 From: Dallastown, PA Member No.: 1,435 Region Association: MidAtlantic Region |
Running hot - heads or oil?
How is your timing? Zach |
dinomium |
Aug 31 2010, 05:08 PM
Post
#18
|
Git on a chair son, all the good stuff is goin over yer head! Group: Benefactors Posts: 2,777 Joined: 2-January 03 From: Bremerton, WA Member No.: 74 Region Association: Pacific Northwest |
Running hot - heads or oil? How is your timing? Zach oil temp has a gauge so I know that it is hot, to check the heads I need a new IR laser thermometer... I have set then timing as close as I can, I dont have a dwell angle reader. New plugs, cap, rotor, wires and points... |
VaccaRabite |
Aug 31 2010, 05:19 PM
Post
#19
|
En Garde! Group: Admin Posts: 13,444 Joined: 15-December 03 From: Dallastown, PA Member No.: 1,435 Region Association: MidAtlantic Region |
Valves? Are they set right? The last time they were set were nay of them tight?
What are your compression numbers? Remember, check compression on a warm engine with the throttle open. Blue smoke is oil in the gas, I think. Or running really rich. Could be getting blow-by through the rings. Zach |
Lo-Fi Version | Time is now: 18th May 2024 - 12:11 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |