 Interesting /6 cooler set-up, RX-7 cooler in the lid. |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Mark Henry |
 Oct 9 2010, 12:58 PM
Post
#1
|
|
that's what I do!  Group: Members Posts: 20,065 Joined: 27-December 02 From: Port Hope, Ontario Member No.: 26 Region Association: Canada  |
Here's an interesting cooler set up, done on a 3.0 245hp engine running in cali heat with no issues. Done for an original /6 that the owner didn't want cut up for a front cooler.
What do you guys think? BTW before you totally knock it it was done by Henry Schmidt at Supertec, so the builder does have some credibility.(IMG:style_emoticons/default/shades.gif) (IMG:http://www.914world.com/bbs2/uploads_offsite/forums.pelicanparts.com-26-1286650724.1.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/forums.pelicanparts.com-26-1286650846.1.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/forums.pelicanparts.com-26-1286650846.2.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/forums.pelicanparts.com-26-1286650846.3.jpg) |
   |
 
|
Posts in this topic
Mark Henry Interesting /6 cooler set-up Oct 9 2010, 12:58 PM
patssle Very nice, but doesn't the hot air go directly... Oct 9 2010, 01:12 PM bmtrnavsky I'm not really an expert on these things, but ... Oct 9 2010, 01:15 PM J P Stein I'm one of those guys who thinks that if a lit... Oct 9 2010, 01:47 PM
Rotary'14
I'm one of those guys who thinks that if a li... Oct 10 2010, 11:59 AM brer That cooling fan pulls huge amounts of air through... Oct 9 2010, 01:49 PM J P Stein My thermostat opens at 185 deg F then the oil goes... Oct 9 2010, 02:06 PM Mark Henry
My question: Henry, wouldn't that pre-heat t... Oct 9 2010, 02:54 PM J P Stein There's a missing number there. Mine was 100C ... Oct 9 2010, 06:33 PM Krieger This location is less than ideal. It is directly ... Oct 9 2010, 07:52 PM Brando Oil cooler on a /6 should always be in the front.
... Oct 10 2010, 10:15 AM 9146986
Oil cooler on a /6 should always be in the front.... Oct 10 2010, 01:36 PM dion9146
Oil cooler on a /6 should always be in the front... Oct 12 2010, 12:19 PM J P Stein Water will boil at 212F. It will evaporate down to... Oct 10 2010, 01:44 PM URY914 I don't like coolers above the engines. Oil dr... Oct 10 2010, 03:42 PM Supertec Mounting the cooler in the deck lid is not the bes... Oct 11 2010, 11:27 AM Elliot Cannon
Mounting the cooler in the deck lid is not the be... Oct 11 2010, 01:26 PM McMark Nice clean install! Whatever works is the per... Oct 11 2010, 11:54 AM andrewb
Nice clean install! Whatever works is the pe... Oct 12 2010, 04:45 PM ArtechnikA ...when the car is travelling forwards the area be... Oct 12 2010, 06:22 PM andrewb
...when the car is travelling forwards the area b... Oct 13 2010, 01:39 AM Mark Henry :agree:
I have one of these coolers and I think ... Oct 11 2010, 01:36 PM tradisrad FWIW High Performance House likes to install the a... Oct 11 2010, 01:43 PM ArtechnikA Wouldn't be my choice but it's not my car.... Oct 12 2010, 04:38 AM 9146986 Hey Dion! That's right where I put the oi... Oct 12 2010, 02:19 PM jaybird840 Henry,
Good to see you here! I l like the ins... Oct 12 2010, 06:07 PM JmuRiz
Henry,
Good to see you here! I l like the in... Oct 12 2010, 06:19 PM J P Stein Per Anderson's 911 book, the 911 fan delivers ... Oct 12 2010, 06:12 PM brer a 200 degree surface can put out about 320 btu... Oct 13 2010, 10:02 AM sean_v8_914 speculation is fun. well thought out theories base... Oct 13 2010, 10:21 AM 9146986 The only problem I can see with a lid mounted cool... Oct 13 2010, 11:28 AM J P Stein Here's a pic of my front cooler. Feeds at the ... Oct 13 2010, 06:45 PM JmuRiz Did you sell the motor only? PM me the details if ... Oct 13 2010, 08:06 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 17th May 2024 - 04:05 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.